Home > Sterling Grill Models > Sterling 4242-54C
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement gas grill parts for Sterling model: 4242-54C
4242-54C Burners
Genuine OEM Sterling stainless steel main tube burner. For LP gas, the air shutter should be open about 1/3.
Note: This part also the factory replacement for burner 52904-E400, which has been discontinued.
Part Number: 52904-E400LP
Dimensions: 14 1/2
Material: stainless steel
Weight: 1.0
$20.15
4242-54C Cooking Grids
Cast iron
cooking grids; SET OF TWO. 318/340
Part Number: 10225-T340
Dimension Front-to-Back: 14 1/2
Dimension Side-to-Side: 10 3/4
Material: cast iron
Weight: 6.00
Image not available
$109.45
4242-54C Igniter Components
Genuine OEM Sterling electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4 mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
4242-54C Grease Trays
GREASE PAN - 330/440/550 for Sterling model 4242-54C.
Part Number: 52009-901
Dimensions: 5 1/8 x 6 1/2
Weight: .40
$15.11
4242-54C Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 4242-54C.
Part Number: 10472-K431
Weight: 0.1
$5.15
4242-54C Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
4242-54C Wheels and Castors
Wheel 6 plastic with 3/8 axle hole for Sterling model 4242-54C.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for Sterling model 4242-54C.
Part Number: 10240-13
Weight: .10
$2.23
4242-54C Warming Racks
Genuine OEM Sterling warming rack.
- Front-to-back of rack itself: 11 7/8
- Side-to-side of rack itself: 21 5/8
- Length of rear mounting rod: 24 1/2
- Length of front swing-away rod: 23 5/8
Part Number: 38110172
Dimensions: 24 1/2
Weight: 3.8
$26.75
4242-54C Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
$17.76
4242-54C Miscellaneous Repair Parts
Hinge pin clip for Sterling model 4242-54C.
Part Number: S21233
Weight: 0.01
$1.08
4242-54C Cart Parts
LEG EXTENSION OFF-SET for Sterling model 4242-54C.
Part Number: 11494-148
Weight: 0.05
Image not available
$1.95
4242-54C Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2 x 10 3/4
Material: aluminum
Weight: 3.0
$27.83
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31