Home > Sterling Grill Models > Sterling 4312-56
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts for Sterling model: 4312-56
4312-56 Burners
Genuine OEM Sterling stainless steel Dual-Tube burner. Use air shutter to control flow of air for LP gas, less air, and for natural gas, more air. NOTE: Manufacturer changed back mounting to a 90 degree bend.
Part Number: 10390-E20
Dimensions: 14 3/8” x 1 1/4”
Material: Stainless steel
Weight: 0.75
$26.94
4312-56 Cooking Grids
Genuine OEM Sterling cast iron
cooking grid SOLD INDIVIDUALLY.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
Part Number: 10225-T356
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 10 3/4”
Material: Cast iron
Weight: 6.1
$55.45
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 63262
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: matte cast iron
Weight: 15.1
$105.10
4312-56 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave for Sterling model 4312-56.
Part Number: 10222-E400
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 6 1/4”
Material: Stainless steel
Weight: 1.25
$25.55
4312-56 Igniter Components
Genuine OEM Sterling electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
4312-56 Grease Trays
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 4312-56.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
4312-56 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 4312-56.
Part Number: 10472-K431
Weight: 0.1
$5.15
4312-56 Wheels and Castors
Genuine OEM Sterling 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
Genuine OEM Sterling twin wheel swivel castor, approximately 2 3/8 inch for Sterling model 4312-56.
Part Number: 10892-13
Weight: 0.35
$7.27
4312-56 Rotisserie components
ROTISSERIE SHIELD BRACKET FOR LEFT SIDE WITH ONE MOUTNING HOLE for Sterling model 4312-56.
Part Number: 10184-E44
Weight: .20
$6.72
ROTISSERIE MOTOR BRACKET for Sterling model 4312-56.
Part Number: 10184-E42
Weight: .25
$8.17
ROTISSERIE SHIELD BRACKET FOR RIGHT SIDE WITH TWO MOUNTING HOLES for Sterling model 4312-56.
Part Number: 10184-E43
Weight: .20
$5.85
4312-56 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 1 7/8” wide and 1 7/16” high. The threaded stem is about 5/16” diameter and 1 1/8” long.
Part Number: 10571-5
Dimensions: 1 7/8” x 1 7/16”
Weight: 0.1
$15.11
4312-56 Miscellaneous Repair Parts
Hinge pin clip for Sterling model 4312-56.
Part Number: S21233
Weight: 0.01
$1.08
Push nut 3/8 for Sterling model 4312-56.
Part Number: S21420
Weight: 0.1
$2.23
4312-56 Shelves
END CAP SIDE SHELF RHS for Sterling model 4312-56.
Part Number: 10711-E47
Weight: 1.0
Image not available
$6.96
4312-56 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57