Home > Sterling Grill Models > Sterling 4411-54
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement gas grill parts for Sterling model: 4411-54
4411-54 Burners
Genuine OEM Sterling stainless steel main tube burner. For LP gas, the air shutter should be open about 1/3.
Note: This part also the factory replacement for burner 52904-E400, which has been discontinued.
Part Number: 52904-E400LP
Dimensions: 14 1/2
Material: stainless steel
Weight: 1.0
$20.15
4411-54 Cooking Grids
Cast iron
cooking grids; SET OF TWO. 318/340
Part Number: 10225-T340
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 3/4”
Material: cast iron
Weight: 6.00
Image not available
$109.45
4411-54 Igniter Components
Genuine OEM Sterling electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
COLLECTOR BOX ASSY 330 430SS
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52224-024A
Weight: 0.2
Image not available
$14.06
4411-54 Grease Trays
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 4411-54.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
4411-54 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 4411-54.
Part Number: 10472-K431
Weight: 0.1
$5.15
4411-54 Wheels and Castors
Genuine OEM Sterling 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
Genuine OEM Sterling twin wheel swivel castor, approximately 2 3/8 inch for Sterling model 4411-54.
Part Number: 10892-13
Weight: 0.35
$7.27
4411-54 Warming Racks
Genuine OEM Sterling warming rack.
- Front-to-back of rack itself: 11 7/8”
- Side-to-side of rack itself: 21 5/8”
- Length of rear mounting rod: 24 1/2”
- Length of front swing-away rod: 23 5/8”
Part Number: 38110172
Dimensions: 24 1/2
Weight: 3.8
$26.75
4411-54 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
4411-54 Miscellaneous Repair Parts
Hinge pin clip for Sterling model 4411-54.
Part Number: S21233
Weight: 0.01
$1.08
ALIGNMENT, BRACKET BLACK for Sterling model 4411-54.
Part Number: 10184-E691
Weight: 1.0
Image not available
$6.96
Push nut 3/8 for Sterling model 4411-54.
Part Number: S21420
Weight: 0.1
$2.23
Washer for Sterling model 4411-54.
Part Number: S21255
Weight: 0.01
$1.08
4411-54 Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57