Home > Sterling Grill Models > Sterling 4414-54
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts to fit Sterling model: 4414-54
4414-54 Burners
Genuine OEM Sterling stainless steel main tube burner. For LP gas, the air shutter should be open about 1/3.
Note: This part also the factory replacement for burner 52904-E400, which has been discontinued.
Part Number: 52904-E400LP
Dimensions: 14 1/2
Material: stainless steel
Weight: 1.0
$20.15
4414-54 Cooking Grids
Cast iron
cooking grids; SET OF TWO. 318/340
Part Number: 10225-T340
Dimension Front-to-Back: 14 1/2
Dimension Side-to-Side: 10 3/4
Material: cast iron
Weight: 6.00
Image not available
$109.45
4414-54 Igniter Components
Genuine OEM Sterling electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4 mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
4414-54 Grease Trays
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 4414-54.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
4414-54 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 4414-54.
Part Number: 10472-K431
Weight: 0.1
$5.15
Black lid handle. Fits older GrillPro and other models which use a half-handle that is 10 3/4 long. Requires 8 3/4 mounting holes, center to center.
Part Number: 30230228
Weight: 0.45
$14.88
4414-54 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
4414-54 Wheels and Castors
Genuine OEM Sterling 7 cart wheel with 3/8 axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
Genuine OEM Sterling twin wheel swivel castor, approximately 2 3/8 inch for Sterling model 4414-54.
Part Number: 10892-13
Weight: 0.35
$7.27
4414-54 Warming Racks
Genuine OEM Sterling warming rack.
- Front-to-back of rack itself: 11 7/8
- Side-to-side of rack itself: 21 5/8
- Length of rear mounting rod: 24 1/2
- Length of front swing-away rod: 23 5/8
Part Number: 38110172
Dimensions: 24 1/2
Weight: 3.8
$26.75
4414-54 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 1 7/8 wide and 1 7/16 high. The threaded stem is about 5/16 diameter and 1 1/8 long.
Part Number: 10571-5
Dimensions: 1 7/8 x 1 7/16
Weight: 0.1
$15.11
4414-54 Miscellaneous Repair Parts
Hinge pin clip for Sterling model 4414-54.
Part Number: S21233
Weight: 0.01
$1.08
Push nut 3/8 for Sterling model 4414-54.
Part Number: S21420
Weight: 0.1
$2.23
Washer for Sterling model 4414-54.
Part Number: S21255
Weight: 0.01
$1.08
4414-54 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31