Home > Sterling Grill Models > Sterling 582254
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement gas grill parts for Sterling model: 582254
582254 Burners
Genuine OEM Sterling stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
582254 Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 12 3/4
Material: cast iron
Weight: 6.75
Image not available
$43.13
582254 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave for Sterling model 582254.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.14
$21.93
582254 Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Sterling electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4 mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
Genuine OEM Sterling electrode with 14 3/8 connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
582254 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2 x 6
Material: stainless steel
Weight: .35
$7.60
Grease tray 440; porcelain flatte matte finish for Sterling model 582254.
Part Number: 57055-901
Dimensions: 6 3/4 x 25 7/16
Material: porcelain steel
Weight: 1.25
$27.24
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 582254.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
582254 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2 apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 582254.
Part Number: 10472-K431
Weight: 0.1
$5.15
582254 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
582254 Wheels and Castors
Wheel 6 plastic with 3/8 axle hole for Sterling model 582254.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for Sterling model 582254.
Part Number: 10240-13
Weight: .10
$2.23
582254 Warming Racks
WARMING RACK 440 BLK PORC for Sterling model 582254.
Part Number: 52005-091
Material: porcelain steel
Weight: 1.0
Image not available
$22.32
582254 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 1 7/8 wide and 1 7/16 high. The threaded stem is about 5/16 diameter and 1 1/8 long.
Part Number: 10571-5
Dimensions: 1 7/8 x 1 7/16
Weight: 0.1
$15.11
582254 Miscellaneous Repair Parts
Hinge pin clip for Sterling model 582254.
Part Number: S21233
Weight: 0.01
$1.08
582254 Hardware
LID BUMPER for Sterling model 582254.
Part Number: Y-11231
Weight: 0.01
$1.08
582254 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18 x 0 5/8
Material: stainless steel
Weight: 0.4
$6.64
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57