Home > Stok Grill Models > Stok SGP4330SB
Stok Quattro 4-Burner LP Gas Grill, Target online item# 14012513
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Stok grill.
Part diagrams and owners manuals for Stok model: SGP4330SB
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Stok model: SGP4330SB
SGP4330SB Burners
stainless steel straight pipe burner for Stok model SGP4330SB.
Part Number: 14331
Dimensions: 15 7/8” x 1”
Material: stainless steel
Weight: 0.8
SGP4330SB Burner Brackets and Carryovers
cross-over tube for Stok model SGP4330SB.
Part Number: 04330
Dimensions: 6 3/4” x 2 9/16”
Material: stainless steel
Weight: 0.2
SGP4330SB Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 64332
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 26”
Material: matte cast iron
Weight: 14.3
SGP4330SB Heat Tents
Porcelain steel Heat Tents. Left and Right Heat Tents. This is a two piece set that appears to look like four
heat plates.
Part Number: 94332
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 25”
Material: porcelain steel
Weight: 3.7
SGP4330SB Igniter Components
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04110
Material: ceramic
Weight: 0.1
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
SGP4330SB Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
SGP4330SB Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Non-Stick Aluminum Griddle. 19 in. x 10.75 in. Non-stick cast aluminum double sided griddle. One flat side for frying, and a ridge side for grilling.
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
Stok SGP4330SB - 05-Oct-25
|
We ship Stok BBQ parts worldwide
Back to Stok grill parts