Sure Heat SGIR27LP

Premium quality stainless steel tube burner for Sure Heat model SGIR27LP.

Part Number: CLA-BS0203
Dimensions: 21 1/2” x 21 1/2”
Material: stainless steel
Weight: 1.6

Stainless steel triple burner set for Sure Heat model SGIR27LP.

Part Number: SONT3
Dimensions: 17 13/16” x 18 1/2”
Material: stainless steel
Weight: 1.6

304 Stainless steel Infrared rear rotisserie burner with ceramic wafer. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 17”
• Maximum width: 3 3/8”
• Burner box 15 3/8” x 3 3/8”
• Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

Stainless steel Z-Bar burner support bracket. Made in USA

Part Number: CLA-MS0116
Dimensions: 2” x 23”
Material: stainless steel
Weight: 0.70

Porcelain steel Flavor Grid. Sold individually, number required varies by grill.

Part Number: 93031
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: porcelain steel
Weight: 1.1

Bottom Flavor Grid. Stainless steel. Made in USA .

Part Number: CLA-MS0181
Dimension Front-to-Back: 12”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.70

Large Flavor Grid. Stainless steel. Only one of these are used on the grill. This part has an extended side that faces the infrared burner and acts as a heat shield. The other Flavor Grids do not have this shield.

• One required per grill.
• Sold individually.
• Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA

Part Number: CLA-TS0072
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 1.2

Flavor grid, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0140
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.98

Ceramic electrode with mounting hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01683
Material: ceramic
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

Genuine OEM 21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Electrode heat shield. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0085
Dimensions: 16 13/16
Material: stainless steel
Weight: 0.4

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3