Home > Surefire Grill Models > Surefire SF34LPSurefire 4-Burner gas grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Surefire grill.
Part diagrams and owners manuals for Surefire model: SF34LP
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Surefire model: SF34LP
SF34LP Burners
Stainless steel burner.
NOTE: Before you order this burner, remove the old burner from your grill and measure and compare to this burner. The manufacturer made different burners for certain years in which the same model number was used.
Part Number: 16731
Dimensions: 17 1/8” x 0 3/4”
Material: stainless steel
Weight: 0.6
$31.72
SF34LP Cooking Grids
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish 1/4 inch rods. Sold as a set of three (3).
Part Number: 50343
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 31 1/8”
Material: porcelain steel wire
Weight: 12.8
$71.78
SF34LP Flavor Grids
Porcelain steel Flavor Grid. Sold individually.
Part Number: 90341
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 2 3/4”
Material: porcelain steel
Weight: 0.80
$25.40 $19.99
Stainless steel Flavor Grid.
- Stainless equivalent of part 90341
- Superior to the original porcelain steel part it replaces
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 90341-SS
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 2 3/4”
Material: stainless steel
Weight: 0.4
$21.56
SF34LP Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Ceramic electrode and 40” wire with female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 06730
Material: ceramic
Weight: 0.1
$8.81
SF34LP Heat indicators and Meat Thermometers
heat indicator for Surefire model SF34LP.
Part Number: 00013
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2
$15.90
SF34LP Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57