Thermos 466464706 (Performance)

Stainless steel burner for Performance and Advantage series grills for Thermos model 466464706.

Replaces Thermos factory part# 7000083

Part Number: 14631
Dimensions: 13 11/16” x 3 3/8”
Material: stainless steel
Weight: 0.9

Cast iron burner for Charbroil Performance and Advantage series grills. Interchangable with the stainless steel version.

Part Number: CBP1-CI
Dimensions: 13 3/4” x 3 3/8”
Material: cast iron
Weight: 6.0

Burner support bracket with gas carryover tubes. For 4-burner grills.

Replaces Thermos factory part# 7000280

Part Number: CBBR3
Dimensions: 25 5/16
Material: stainless steel
Weight: 0.45

Porcelain steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Replaces Thermos factory part# 7000025

Part Number: 54632
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 23 7/8”
Material: porcelain steel wire
Weight: 6.13

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• .225” solid stainless rods
• Sold as a set of two (2).

Each panel measures:

• Front-to-Back: 15”
• Side-to-Side: 11 3/8”

Total Side-to-Side: 22 3/4”

Part Number: 54632-SS-X2
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 22 3/4”
Material: stainless steel
Weight: 6.8

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• Solid .225 diameter stainless rods
• Sold individually

Fits grills by Arkla, Falcon, Charbroil, Kenmore and Thermos. May fit others.

Part Number: 54632-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 11 3/8”
Material: stainless steel
Weight: 3.40

SET OF THREE/3 PACK Stainless steel heat plate. Made in USA .

Note: Not identical to original, but a fully functional replacement.

Note: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0144-X3
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.8

Stainless steel heat plate. Made in USA .

Note: Not identical to original, but a fully functional replacement.

Note: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0144
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 0.60

Porcelain steel Vaporiser Tent. Sold individually.

Replaces Thermos factory part# 7000381

Part Number: 94631
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 5/8”
Material: porcelain steel
Weight: 1.0

Ceramic electrode for use with CBP1-CI cast iron burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-24B
Weight: 0.3

Round heat indicator.

• Single probe
• 1 13/16” diameter
• Requires 3/8” mounting hole

Replaces Thermos factory part# G431-0020-W2

Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1