Turbo CG3TCBN (Classic)

Cast iron burner for Turbo model CG3TCBN.

Part Number: 23301
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 3.9

Cast stainless steel burner. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.

NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.

Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2

Cast iron cooking grids (set of 2). Porcelain enameled, glossy finish.

Part Number: 62152
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 24 3/4”
Material: gloss cast iron
Weight: 13.10

Cast iron cooking grids. SET OF TWO (2) panels.

• Porcelain treated, matte finish
• Each panel measures 19 1/8” x 12 3/8”
• Overall dimensions: 19 1/8” x 24 3/4”

Part Number: CG-58P-CI-X2
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 3/8”
Material: cast iron
Weight: 16.7

Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/4” x 12 1/2”
• Made in USA .
• Sold individually.

Part Number: CLA-GS0190
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12 1/2”
Material: stainless steel
Weight: 8.0

Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 19 1/8”
• Side-to-Side: 12 3/86”

Total Side-to-Side: 24 3/4”

Part Number: 62152-UNI-X2
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 24 3/4”
Material: cast iron
Weight: 16.7

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 62152-UNI-X2 for a set of two (2).

Part Number: 62152-UNI
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 3/8”
Material: cast iron
Weight: 8.35

Stainless steel heat plate/briquette rack. Includes 16 briquettes.

Part Number: 94751
Dimensions: 16 1/2” x 6 1/2”
Material: stainless steel
Weight: 4.1

Porcelain steel Flame Tamer / Heat Tent. Sold individually.

Part Number: 95131
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 2.4

Stainless steel aftermarket Flame Tamer / Heat Tent.

• Stainless equivalent of part 95131
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 95131-SS
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.5

Black control knob (Some originals may have been chrome).

• Off position D-Value: 12 o'clock
• Knob diameter: 2 3/16”
• Socket diameter: 6mm
• Knob shaft: None

Replaces Turbo factory part# 260158

Part Number: 03430
Dimensions: 2 3/16” x 2 3/16”
Material: plastic
Weight: 0.2

Genuine OEM natural gas regulator for Turbo model CG3TCBN.

Part Number: 90000NGR
Weight: 0.3

Genuine OEM natural gas manifold tube. 1st from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269696
Material: brass/aluminum
Weight: 0.2

Genuine OEM natural gas manifold tube. 2nd from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269704
Material: brass/aluminum
Weight: 0.2

Genuine OEM natural gas manifold tube. 3rd from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269712
Material: brass/aluminum
Weight: 0.2

Genuine OEM copper flame thrower tube. 1st from right. 150mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269613
Material: copper/brass
Weight: 0.1

Genuine OEM copper flame thrower tube. 2nd from right. 210mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269621
Material: copper/brass
Weight: 0.1

Genuine OEM copper flame thrower tube. 3rd from right. 310mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269639
Material: copper/brass
Weight: 0.1

Genuine OEM stainless steel baffle for Turbo control panel for Turbo model CG3TCBN.

Part Number: 100743
Dimensions: 5” x 18 1/2”
Material: stainless steel
Weight: 0.3

Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.

Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

Part Number: 40538
Material: chrome steel
Weight: 1.1

High quality, long lasting ceramic briquettes. 90 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 90 briquettes will cover about 562 square inches. This is an area roughly 17” x 33”. For larger grills.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Made in USA

Part Number: CLA-AC0405
Dimensions: 2” x 2”
Material: ceramic
Weight: 11.7

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5