Home > Tuscany Grill Models > Tuscany CS812
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Tuscany grill.
Part diagrams and owners manuals for Tuscany model: CS812
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Tuscany model: CS812
CS812 Burners
Premium grade quality stainless steel tube burner for Tuscany model CS812.
Replaces Tuscany factory part# FCCS3308005
Part Number: CLA-BS0225
Dimensions: 17 7/8” x 3/4”
Material: stainless steel
Weight: 0.35
$19.01
Stainless Steel Burner For Tuscany & Perfect Flame Gill Models for Tuscany model CS812.
Replaces Tuscany factory part# FCCS3308005
Part Number: TUST1
Dimensions: 17 7/8
Material: stainless steel
Weight: 1.0
$19.01
CS812 Burner Brackets and Carryovers
Stainless steel carryover. Made in USA
.
Part Number: CLA-MS0098
Dimensions: 2 7/8” x 15”
Material: stainless steel
Weight: 0.55
$30.12
CS812 Flavor Grids
Large Flavor Grid. Stainless steel. Only one of these are used on the grill. This part has an extended side that faces the infrared burner and acts as a heat shield. The other Flavor Grids do not have this shield.
- One required per grill.
- Sold individually.
- Made in USA .
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA
Part Number: CLA-TS0072
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 1.2
$31.72
Flavor grid, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0140
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.98
$28.91
Porcelain steel Flavor Grid. Sold individually, number required varies by grill.
Replaces Tuscany factory part# FCCS0007004
Part Number: 93031
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: porcelain steel
Weight: 1.1
$27.56
CS812 Igniter Components
Ceramic electrode with mounting hardware.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 01683
Material: ceramic
Weight: 0.1
$12.47
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Ceramic electrode and 40” wire with female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 06730
Material: ceramic
Weight: 0.1
$8.81
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
Genuine OEM 21” wire for side burner or other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T12
Dimensions: 21
Weight: 0.05
$4.21
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Tuscany factory part# FCCS3308012
Part Number: 03350
Weight: 0.7
$31.96
CS812 Warming Racks
Stainless steel bread warming rack. Replaces OEM # FCCS3308002. Can also be used as an alternative warming rack for delicate foods like vegetabes and seafood. Made in USA
Part Number: CLA-WS0247
Material: stainless steel
Weight: 1.90
Image not available
$43.05
CS812 Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31