Home > Uberhaus Grill Models > Uberhaus 780-0003
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Uberhaus grill.
Replacement grill parts for the Uberhaus 780-0003
780-0003 Burners
Stainless steel burner for Uberhaus model 780-0003.
Part Number: 15491
Dimensions: 14 3/8 x 1
Material: stainless steel
Weight: 0.9
$34.77
780-0003 Cooking Grids
Premium quality stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it..
- 304 commercial grade stainless steel
- Solid rod diameter 1/4
- Made in USA .
- Sold individually.
Part Number: CLA-GS0189
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 13 1/8
Material: stainless steel
Weight: 4.7
$56.30
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 61192
Dimension Front-to-Back: 17
Dimension Side-to-Side: 26 1/2
Material: matte cast iron
Weight: 12.10
$91.86
780-0003 Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 97371
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 0.55
$21.54
SET OF THREE/3 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.16
$48.77
SET OF FOUR/4 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.88
$62.52
Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 0.72
$17.61
Porcelain steel Flame Tamers. SET OF SIX.
Part Number: 97371-6X
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 3.3
Image not available
$105.36
780-0003 Igniter Components
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
$12.38
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 3
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16 x 2
Weight: 0.7
$38.00
780-0003 Heat indicators and Meat Thermometers
Round 2 3/8 diameter heat indicator, includes one wing nut and one locking nut.
- Requires minimum 3/8 mounting hole
- Single 1 3/8 probe
- Threaded portion of probe stops at 1/2 from base
- See photo for details
Part Number: 00012
Dimensions: 2 3/8 x 2 3/8
Weight: 0.1
$15.16
780-0003 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2 x 10 3/4
Material: aluminum
Weight: 3.0
$27.83
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31