Home > Uniflame Grill Models > Uniflame GBC1025WUniflame GBC1025W 2-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Uniflame grill.
Part diagrams and owners manuals for Uniflame model: GBC1025W
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Uniflame model: GBC1025W
GBC1025W Burners
Stainless steel burner for Uniflame model GBC1025W.
Replaces Uniflame factory part# 55-09-118
Part Number: 183L1
Dimensions: 13 3/4” x 5 1/2”
Material: stainless steel
Weight: 0.7
$35.18
Stainless steel burner for Uniflame model GBC1025W.
Replaces Uniflame factory part# 55-09-119
Part Number: 183R1
Dimensions: 13 3/4” x 5 1/2”
Material: stainless steel
Weight: 0.7
$35.18
GBC1025W Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 59211
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 25”
Material: porcelain steel bar
Weight: 4.0
$49.91
GBC1025W Heat Plates
Porcelain steel
Heat Plate. Sold individually.
Replaces Uniflame factory part# 55-07-319
Part Number: 97331
Dimension Front-to-Back: 21 3/4”
Dimension Side-to-Side: 11 3/4”
Material: porcelain steel
Weight: 3.2
$47.13 $36.95
Stainless steel aftermarket
Heat Plate.
- Stainless equivalent of part 97331
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
Part Number: 97331-SS
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 21 3/4”
Material: stainless steel
Weight: 2.2
$40.58
This stainless steel version of UFHP1
Heat Plate replaces the original porcelain steel plate for Uniflame model GBC1025W.
Part Number: UFHP1-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 25”
Material: stainless steel
Weight: 2.5
$40.58
GBC1025W Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Uniflame factory part# 55-07-321
Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5
$33.89
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Uniflame factory part# 55-07-322
Part Number: 03350
Weight: 0.7
$31.96
Push-button electronic igniter with three (3)
spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG3007
Weight: 0.2
$37.10 $14.99
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
Burner mounted electrode. Mounts to flange on underside of burner.
- Ceramic insulator
- Mounting bracket with nut and bolt
- 8” wire with female spade connector
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04820
Material: ceramic
Weight: 0.1
$6.81
GBC1025W Heat indicators and Meat Thermometers
heat indicator for Uniflame model GBC1025W.
Replaces Uniflame factory part# 55-10-117
Part Number: 00017
Dimensions: 3 3/4” x 1 7/8”
Weight: 0.1
$12.93
GBC1025W Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96