Uniflame GBC820W

Stainless steel burner with electrode mounting bracket. Includes burner mounting screws.

Part Number: 182R1
Dimensions: 13 3/8” x 5 11/16”
Material: stainless steel
Weight: 0.8

Porcelain steel cooking grid. Porcelain enameled, glossy finish. Sold individually.

Replaces Uniflame factory part# 55-07-310

Part Number: 58201
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 25”
Material: porcelain steel bar
Weight: 4.0

Porcelain steel Heat Plate. Sold individually.

Replaces Uniflame factory part# 55-07-319

Part Number: 97331
Dimension Front-to-Back: 21 3/4”
Dimension Side-to-Side: 11 3/4”
Material: porcelain steel
Weight: 3.2

Stainless steel aftermarket Heat Plate.

• Stainless equivalent of part 97331
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually

Part Number: 97331-SS
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 21 3/4”
Material: stainless steel
Weight: 2.2

This stainless steel version of UFHP1 Heat Plate replaces the original porcelain steel plate for Uniflame model GBC820W.

Part Number: UFHP1-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 25”
Material: stainless steel
Weight: 2.5

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Burner mounted electrode. Mounts to flange on underside of burner.

• Ceramic insulator
• Mounting bracket with nut and bolt
• 8” wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04820
Material: ceramic
Weight: 0.1

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Uniflame factory part# 55-07-321

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

LP regulator with QCC-1 connection and two 23” hoses for some side burner applications.

• For use on ”new style” QCC-1 tanks.
• Total length is 47”
• Both hose ends are SAE 3/8” female flare fittings.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Part Number: 80034
Dimensions: 48 1/2” x 0 1/2”
Weight: 1.2

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Replaces Uniflame factory part# 55-07-358

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2