Home > Uniflame Grill Models > Uniflame GBC831WB-CUniflame GBC831WB-C 2-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Uniflame grill.
Part diagrams and owners manuals for Uniflame model: GBC831WB-C
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Uniflame model: GBC831WB-C
GBC831WB-C Burners
Stainless steel tube burner. Includes
Replaces Uniflame factory part# 55-07-371
Part Number: 18311
Dimensions: 16 1/8 x 1
Material: stainless steel
Weight: 0.5
$32.95
GBC831WB-C Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Replaces Uniflame factory part# 55-08-119
Part Number: 68312
Dimension Front-to-Back: 17 7/16
Dimension Side-to-Side: 27 3/8
Material: gloss cast iron
Weight: 12.7
$85.90
GBC831WB-C Heat Tents
Stainless steel Heat Tent/ Flame Tamer. Sold individually, number required varies.
Part Number: BMHP8
Dimension Front-to-Back: 15 3/8
Dimension Side-to-Side: 3 9/16
Material: stainless steel
Weight: 0.5
$22.94
GBC831WB-C Heat Distribution Plates
Stainless steel Heat Distribution Plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0147
Dimension Front-to-Back: 15 5/16
Dimension Side-to-Side: 3 5/8
Material: stainless steel
Weight: 0.54
$22.94
Porcelain steel Heat Distribution Plate. Sold individually.
Replaces Uniflame factory part# 55-08-121
Part Number: 92311
Dimension Front-to-Back: 15 3/8
Dimension Side-to-Side: 3 15/16
Material: porcelain steel
Weight: 0.63
$26.50 $21.77
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16
Dimension Side-to-Side: 3 7/8
Material: stainless steel
Weight: 2.64
$77.52
Stainless steel Heat Distribution Plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0135
Dimension Front-to-Back: 15 5/16
Dimension Side-to-Side: 3 7/8
Material: stainless steel
Weight: 0.66
$22.29
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0147-X4
Dimension Front-to-Back: 15 5/16
Dimension Side-to-Side: 3 5/8
Material: stainless steel
Weight: 2.16
$79.78
SET OF FIVE/5 PACK Stainless steel Heat Distribution Plates. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0147-X5
Dimension Front-to-Back: 15 5/16
Dimension Side-to-Side: 3 5/8
Material: stainless steel
Weight: 2.7
$93.58
GBC831WB-C Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Burner mounted electrode. Mounts to flange on underside of burner. Fits burners 10061 and 10031.
Ceramic insulatorMounting bracket with nut and boltMale spade connectorFor more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Uniflame factory part# 55-07-387
Part Number: TS-IG4010
Weight: 0.2
$18.48
GBC831WB-C Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Replaces Uniflame factory part# 55-08-128
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
GBC831WB-C Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4 x 12 3/4
Material: stainless steel
Weight: 1.6
$22.70
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60