Home > Uniflame Grill Models > Uniflame GBC900W-CUniflame GBC900W-C 2-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Uniflame grill.
Part diagrams and owners manuals for Uniflame model: GBC900W-C
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Uniflame model: GBC900W-C
GBC900W-C Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
GBC900W-C Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Replaces Uniflame factory part# 55-09-300
Part Number: 51001
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 20”
Material: porcelain steel wire
Weight: 1.10
$30.81
GBC900W-C Heat Plates
Porcelain steel
Heat Plate. Sold individually.
Replaces Uniflame factory part# 55-09-303
Part Number: 99291
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 10 5/8”
Material: porcelain steel
Weight: 2.0
$31.61
Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0161
Dimension Front-to-Back: 16 11/16”
Dimension Side-to-Side: 10 9/16”
Material: stainless steel
Weight: 1.8
$40.11
GBC900W-C Igniter Components
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Push-Button self-grounding
piezo spark generator. Has round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. For more information, see our help center article
Ignition 101.
Replaces Uniflame factory part# 55-14-988
Part Number: 03100
Weight: 0.1
$9.25
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
GBC900W-C Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60