Home > Uniflame Grill Models > Uniflame GBC940WIRUniflame GBC940WIR 3-Burner LP gas grill with sear burner & side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Uniflame grill.
Part diagrams and owners manuals for Uniflame model: GBC940WIR
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement BBQ grill parts for Uniflame model: GBC940WIR
GBC940WIR Burners
Stainless steel tube burner. Includes
Replaces Uniflame factory part# 55-09-026
Part Number: 18311
Dimensions: 16 1/8” x 1”
Material: stainless steel
Weight: 0.5
$32.95
GBC940WIR Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 61192
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10
$91.86
Channel formed U-shaped porcelain steel
cooking grids.
Channel formed means rolled steel stamped into a U-shape; is not solid round rods.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Replaces Uniflame factory part# 55-09-009
Part Number: 59812
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 27”
Material: stamped porcelain steel
Weight: 7.2
$67.52
GBC940WIR Heat Distribution Plates
Porcelain steel Heat Distribution Plate. Sold individually.
Replaces Uniflame factory part# 55-09-018
Part Number: 92311
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 0.63
$26.50 $21.77
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64
$77.52
Stainless steel Heat Distribution Plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0135
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.66
$22.29
GBC940WIR Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Burner mounted electrode. Mounts to flange on underside of burner. Fits burners 10061 and 10031.
Ceramic insulatorMounting bracket with nut and boltMale spade connectorFor more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
GBC940WIR Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31