Home > Uniflame Grill Models > Uniflame GBC956W1-CUniflame GBC956W1-C 4-Burner LP gas grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Uniflame grill.
Part diagrams and owners manuals for Uniflame model: GBC956W1-C
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Uniflame model: GBC956W1-C
GBC956W1-C Burners
Stainless steel tube burner. Includes
Replaces Uniflame factory part# 55-09-026
Part Number: 18311
Dimensions: 16 1/8” x 1”
Material: stainless steel
Weight: 0.5
$32.95
GBC956W1-C Cooking Grids
Channel formed U-shaped porcelain steel
cooking grids.
Channel formed means rolled steel stamped into a U-shape; is not solid round rods.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 59812
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 27”
Material: stamped porcelain steel
Weight: 7.2
$67.52
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Replaces Uniflame factory part# 55-09-258
Part Number: 61192
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10
$91.86
GBC956W1-C Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 91191
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 4 3/16”
Material: porcelain steel
Weight: 0.9
$26.50 $20.99
Stainless steel aftermarket flame tamer
heat plate.
- Stainless equivalent of part 91191
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 91191-SS
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 1.0
$23.13
GBC956W1-C Heat Distribution Plates
Porcelain steel Heat Distribution Plate. Sold individually.
Replaces Uniflame factory part# 55-09-018
Part Number: 92311
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 0.63
$26.50 $21.77
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64
$77.52
Stainless steel Heat Distribution Plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0135
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.66
$22.29
GBC956W1-C Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Burner mounted electrode. Mounts to flange on underside of burner. Fits burners 10061 and 10031.
Ceramic insulatorMounting bracket with nut and boltMale spade connectorFor more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
GBC956W1-C Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73