Home > Uniflame Grill Models > Uniflame GBC981WBLUniflame GBC981WBL 3-Burner LP gas grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Uniflame grill.
Part diagrams and owners manuals for Uniflame model: GBC981WBL
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Uniflame model: GBC981WBL
GBC981WBL Burners
Stainless steel tube burner. Includes
Replaces Uniflame factory part# 55-08-430
Part Number: 18311
Dimensions: 16 1/8” x 1”
Material: stainless steel
Weight: 0.5
$32.95
GBC981WBL Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 61192
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10
$91.86
Channel formed U-shaped porcelain steel
cooking grids.
Channel formed means rolled steel stamped into a U-shape; is not solid round rods.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Replaces Uniflame factory part# 55-09-152
Part Number: 59812
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 27”
Material: stamped porcelain steel
Weight: 7.2
$67.52
GBC981WBL Heat Distribution Plates
Porcelain steel Heat Distribution Plate. Sold individually.
Replaces Uniflame factory part# 55-08-121
Part Number: 92311
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 0.63
$26.50 $21.77
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64
$77.52
Stainless steel Heat Distribution Plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0135
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.66
$22.29
GBC981WBL Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Burner mounted electrode. Mounts to flange on underside of burner. Fits burners 10061 and 10031.
Ceramic insulatorMounting bracket with nut and boltMale spade connectorFor more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
GBC981WBL Heat indicators and Meat Thermometers
Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.
Replaces Uniflame factory part# 55-09-173
Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2
$9.95
GBC981WBL Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31