Home > Vermont Castings Grill Models > Vermont Castings VM448N
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Vermont Castings grill. This is best done with the old parts out of the grill. Verify your Vermont Castings grill model number.
Replacement grill parts for Vermont Castings model: VM448N
VM448N Burners
Stainless steel burner for Vermont Castings model VM448N.
Replaces Vermont Castings factory part# 50004240
Part Number: 13101
Dimensions: 17” x 1”
Material: stainless steel
Weight: 1.0
$33.04
VM448N Burner Brackets and Carryovers
Stainless steel Flash Tube burner support bracket. Made in USA
.
Replaces Vermont Castings factory part# 50001300B
Part Number: CLA-MS0112
Dimensions: 2” x 13 1/4”
Material: stainless steel
Weight: 0.30
$18.93
VM448N Cooking Grids
Cast iron
cooking grid.
Porcelain enameled, glossy finish.
Part Number: 61271
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 9 1/8”
Material: gloss cast iron
Weight: 7.0
$59.01
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 61271-UNI
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 9 1/16”
Material: cast iron
Weight: 5.45
$67.49
VM448N Flame Tamers
Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Vermont Castings factory part# 50000877
Part Number: CLA-TS0016
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3
$37.51
SET OF THREE/3 PACK Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6
$95.56
VM448N Igniter Components
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Replaces Vermont Castings factory part# 50000431
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
VM448N Regulators and Hoses
12 foot natural gas quick-connect hose.
- The hose end with SAE 3/8” female flare fitting connects to grill.
- Designed for use with quick connect coupling part# 81441
- Hose and coupling also available together as part# 80144.
Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. (Inside diameter of hose is 3/8” and the outside is about 5/8”.) See our
flare fitting description for information on measuring and sizes.
Replaces Vermont Castings factory part# 50000198
Part Number: 81442
Weight: 2.3
$46.34
Five piece 3/8” natural gas quick disconnect set includes:
- Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
- Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
- Hansen & Sturgis dust cover
- plastic dust plug
- Plastic 3/8 MPT Snap Tite
- Suitable up to approximately 60,000 BTU.
Part Number: ASCPL-1
Weight: 3.0
$75.71
Brass 3/8” Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.
Part Number: ASCPL-3
Weight: 0.4
$33.61
VM448N Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59