Home > Vermont Castings Grill Models > Vermont Castings VM600BSP
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Vermont Castings grill. This is best done with the old parts out of the grill. Verify your Vermont Castings grill model number.
Replacement grill parts for Vermont Castings model: VM600BSP
VM600BSP Burners
Commercial premium grade stainless steel burner for Vermont Castings model VM600BSP.
Replaces Vermont Castings factory part# 50003100
Part Number: 13001
Dimensions: 17” x 1”
Material: stainless steel
Weight: 0.8
$42.40 $24.00
Burner mounting plate. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.
- Sold individually, number required varies. Use one per burner.
- Includes mounting bolt and nut
- Includes extra holes for mounting to grill, if necessary.
- Comes with complete installation instructions.
For models:
- CF9080/85/86
- VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
- VCS3507/4007/5007/3507BI/5007BI
Made in USA
Part Number: CLA-MS0227
Dimensions: 3 3/4” x 4 15/16”
Material: stainless steel
Weight: 0.11
$17.92
Burner mounting plate. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.
- Premium grade stainless steel
- Includes gasket and mounting screw
- Comes with complete installation instructions
- Sold individually.
For models:
- CF9080/85/86
- VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
- VCS3507/4007/5007/3507BI/5007BI
Part Number: 03501
Dimensions: 3 3/4” x 4”
Material: stainless steel
Weight: 0.16
$24.70
VM600BSP Cooking Grids
Cast iron
cooking grid.
Porcelain enameled, glossy finish.
Replaces Vermont Castings factory part# 50001227
Part Number: 61271
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 9 1/8”
Material: gloss cast iron
Weight: 7.0
$59.01
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 61271-UNI
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 9 1/16”
Material: cast iron
Weight: 5.45
$67.49
VM600BSP Flame Tamers
Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Vermont Castings factory part# 50000877
Part Number: CLA-TS0016
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3
$37.51
SET OF THREE/3 PACK Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6
$95.56
VM600BSP Igniter Components
Rotary
piezo spark generator. Two
round connector leads send spark to both main burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Vermont Castings factory part# 50000111
Part Number: 03220
Weight: 0.2
$17.41
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Replaces Vermont Castings factory part# 50000431
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
VM600BSP Heat indicators and Meat Thermometers
Genuine OEM Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
VM600BSP Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31