Regulators and Hoses for Viking grills

LP regulator with QCC-1 connection for some Viking grills. Has a 3/8” female NPT pipe thread that is 19/32” inside diameter of the female threads.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 00920
Weight: 0.5

36” LP hose with 3/8” male pipe thread (MPT) on one end, 3/8” female flare fitting on the other for some Viking grills.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 01110
Weight: 0.6

Aluminum block to replace natural gas regulator 38100 for some Viking grills.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 38200
Dimensions: 2 5/16” x 2 1/16”
Material: aluminum
Weight: 0.4

48” Propane adaptor hose for some Viking grills.

• 48” portable propane adaptor hose
• Can be used to connect table top grills, camping stoves, and other appliances designed to use disposable LP bottles to standard 20lb LP tanks.
• For use with tank valves featuring QCC1 connection

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 80004
Dimensions: 50 1/4” x 0 1/2”
Weight: 0.8

24” LP hose and regulator with QCC-1 connection for some Viking grills.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

LP regulator with QCC-1 connection and two 23” hoses for some side burner applications for some Viking grills.

• For use on ”new style” QCC-1 tanks.
• Total length is 47”
• Both hose ends are SAE 3/8” female flare fittings.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 80034
Dimensions: 48 1/2” x 0 1/2”
Weight: 1.2

12 foot natural gas hose with brass quick-connect coupling for some Viking grills.

• Consists of hose part# 81442 and coupling part# 81441.
• The hose end with SAE 3/8” female flare fitting connects to grill.
• The other hose end, the quick-connect end (with coupler attached), has a 3/8” female pipe thread and connects to the gas supply.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8” (the inside hose diameter is 3/8”). See our flare fitting description for information on measuring and sizes.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 80144
Weight: 3.7

Super heavy duty Sturgis 12' natural gas hose with 1/2” model 4 brass quick-connect coupling for some Viking grills. Includes Couple-Safe Technology Thermal Shut-Off Device Protection. For grills over 70,000 BTU.

• Consists of 1/2” ID hose and coupling (part# 81451).
• The hose end with SAE 1/2” female flare fitting connects to grill.
• The other hose end, the quick-connect end (with coupler attached), has a 1/2” female pipe thread and connects to the gas supply.

Note: The grill must have a matching SAE 1/2” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 1/2” fitting is much larger, approximately 3/4”. See our flare fitting description for information on measuring and sizes.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 80145
Weight: 3.9

Brass 3/8” natural gas quick connect coupling for some Viking grills.

• Use with hose #81442.
• Coupling and hose also available together as part# 80144.
  
  See description of part# 80144 for more information and pictures of how part couples with hose.
  
  
  NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original
  
  Part Number: 81441
  Dimensions: 2 1/2” x 1 1/8”
  Material: brass
  Weight: 0.4

12 foot natural gas quick-connect hose for some Viking grills.

• The hose end with SAE 3/8” female flare fitting connects to grill.
• Designed for use with quick connect coupling part# 81441
• Hose and coupling also available together as part# 80144.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. (Inside diameter of hose is 3/8” and the outside is about 5/8”.) See our flare fitting description for information on measuring and sizes.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 81442
Weight: 2.3

Brass 1/2” natural gas quick connect coupling for some Viking grills. Included in hose and coupling assembly part 80145.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 81451
Dimensions: 4” x 1 5/8”
Material: brass
Weight: 0.7

QCC-1 type 1 appliance end fitting for some Viking grills. Replaces POL. It has a 1/4” male NPT thread to attach to the old regulator.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 86495
Weight: 0.3

Universal LP regulator for tabletop grills for some Viking grills. Includes orifice.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: CLA-VL0254
Material: aluminum/brass
Weight: 0.40

Universal table top regulator for disposable LP bottles for some Viking grills. Uses 1/8” male MPT orifice, not included.

• CGA-600 inlet
• 1/4” FNPT outlet
• Includes1/4” MNPT x 1/8” FNPT bushing
• Can use old 1/8” male MPT orifice.

Will accept many old orifices. FNPT is Female National Pipe Thread.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: R6000
Weight: 0.5

RONHK-R 24” LP hose and LP regulator with QCC-1 connection for some Viking grills.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Replaces OEM part RONHK.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: RONHK-R
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80