Igniter Components for Viking grills

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors) for some Viking grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes for some Viking grills. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

008090-000-R Two prong Electrode for some Viking grills. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R
Weight: 0.25

008090-000-R-X2 SET OF TWO (2) Two-prong Electrodes for some Viking grills. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R-X2
Weight: 0.5

008090-000-R-X3 SET OF THREE (3) two-prong Electrodes for some Viking grills. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287 and PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R-X3
Weight: 0.75

008090-000-R Two prong Electrode for some Viking grills. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R-X4
Weight: 1.00

008091-000-R Electrode with m spade wide connection for some Viking grills. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R
Weight: 0.1

008091-000-R-X2 SET OF TWO (2) Electrodes with m spade wide connection for some Viking grills. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X2
Weight: 0.2

008091-000-R-X3 SET OF THREE (3) Electrodes with m spade wide connection for some Viking grills. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X3
Weight: 0.3

VIK-PA020036-R Spark Module for some Viking grills. 4-Spark electronic ignition module. Requires 1 AA battery (not included).

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA020036.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PA020036-R
Weight: .33

PB040176-R Two-prong Electrode for some Viking grills. Also known in Viking documentation as ”IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040176.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040176-R
Weight: 0.25

PB040179-R Electrode with m spade wide connection for some Viking grills. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040179-R
Weight: 0.1

PB040179-R-X2 SET OF TWO (2) Electrodes with m spade wide connection for some Viking grills. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040179-R-X2
Weight: 0.2

PB040287-R Two-prong Electrode for some Viking grills. Also known in Viking documentation as ”GRILL BURNER IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040287.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040287-R
Weight: 0.25

PB040288-R Electrode with m spade wide connection for some Viking grills. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040288-R
Weight: 0.1

B040288-R-X3 SET OF THREE (3) Electrodes with m spade wide connection for some Viking grills. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040288-R-X3
Weight: 0.3

PA020022-R Rotary piezo spark generator with single round connector outlet for some Viking grills. Also known in Viking documentation as ”SINGLE OUTPUT IGNITION SWITCH-(VGBQ (1691.06)”.

• Includes knob part# PB010156
• No battery required.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking ignition part PA020022.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK1-PA020022-R
Weight: 0.2

PA020023-R 2-Outlet rotary piezo spark generator for some Viking grills. Also known in Viking documentation as ”DUAL OUTPUT IGNITION SWITCH-(VGBQ) 1691-04”.

• Includes knob part# PB010156
• No battery required.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking ignition part PA020023.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK1-PA020023-R
Weight: 0.2