Home > Warm Morning Grill Models > Warm Morning G-3 (single post)
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Warm Morning grill.
Replacement grill parts to fit Warm Morning model: G-3 (single post)
G-3 (single post) Burners
Standard stainless steel burner and venturi assembly. Includes:
- One (1) ELB stainless steel H burner with adjustable legs
- One (1) V-7A adjustable (7 1/2 to 9 1/2) single straight venturi
- All necessary gaskets and screws.
Part Number: ELB+V-7A
Material: stainless steel
Weight: 3.0
Dimensions: 7 1/4 x 19 1/4
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 10201-70401
Material: stainless steel
Weight: 3.0
Dimensions: 19 1/2 x 8
Stainless steel burner for Warm Morning model G-3 (single post).
Part Number: 10201
Material: stainless steel
Weight: 2.5
Dimensions: 19 1/2 x 8
G-3 (single post) Venturis
two venturi gaskets with screws for Warm Morning model G-3 (single post).
Part Number: 00400
Weight: 0.05
Dimensions: 3 1/16 x 1 1/4
Straight adjustable single venturi.
- Adjusts from 7 to 10.
- Requires minimum 1 7/8 hole in grill bottom for venturi to pass thru. For grills with smaller holes, see venturi part# 72401.
- Can be used in pairs for twin venturi applications.
Includes all necessary gaskets and screws/nuts.
Part Number: 70401
Material: zinc plated steel
Weight: 0.6
Dimensions: 10
72401 is a flexible and adjustable venturi that adjusts from 8 to 11. Sold individually.
Used to replace venturis for virtually any grill model for which no exact fit venturi is available. Gasket & screws not included, see part numbers 00400 or SHK4.
Part Number: 72401
Material: zinc plated steel
Weight: 0.3
Dimensions: 7 1/2 x 11
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4 venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
G-3 (single post) Cooking Grids
Premium stainless steel cooking grids for Broilmaster and Warm Morning grills. Set of three (3) grids. Fits size 3 grill heads (D3, G3, P3, S3, U3, etc.). Far superior to porcelain coated steel grids.
- Made in USA

- Commercial grade 304 stainless steel
- .225 solid stainless rods
- Sold as a set of three (3) panels
Each panel measures:- Front-to-Back: 16 7/8
- Side-to-Side: 8 3/8
Total Side-to-Side: 25 1/8
Part Number: 52503-SS-X3
Material: stainless steel
Weight: 12
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 25 1/8″
Premium stainless steel cooking grid for Broilmaster and Warm Morning grills. Fits size 3 grill heads (D3, G3, P3, S3, U3, etc.). Far superior to porcelain coated steel grids.
- Made in USA

- Commercial grade 304 stainless steel
- .225 solid stainless rods
- Sold individually, 3 required.
Part Number: 52503-SS
Material: stainless steel
Weight: 4.00
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 8 3/8″
Cast iron water fall style/mutliple level
cooking grids (set of 3) for Warm Morning model G-3 (single post).
Part Number: 62503
Material: cast iron
Weight: 21.10
Dimensions:
- Front-To-Back: 16 13/16″
- Side-To_Side: 25 1/8″
Premium quality stainless steel
cooking grids. SET OF THREE (3). Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- .225 diameter solid stainless rods
- Each panel measures 16 7/8 x 8 3/8
- Overall dimensions: 16 7/8 x 25 1/8
.
Part Number: CG-20SS-X3
Material: stainless steel
Weight: 12.00
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 25 1/8″
G-3 (single post) Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Warm Morning model G-3 (single post).
Part Number: BG-16
Material: carbon steel
Weight: 4.2
Dimensions:
- Front-To-Back: 13 1/8″
- Side-To_Side: 23 3/4″
G-3 (single post) Heat Shields
Aluminized steel radiation shield. Installs below burner in some Amberlight, TEMCO, Charbroil, and Broilmaster models.
Part Number: 00600
Material: Aluminized steel
Weight: 1.8
Dimensions:
- Front-To-Back: 8″
- Side-To_Side: 16 3/4″
G-3 (single post) Igniter Components
20 Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20 wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
G-3 (single post) Accessories
High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2 apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15 x 24.
- Top quality product
- Each briquette measure 2 x 2
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15 x 24
- 70 briquetes covers an area apprimately 17 x 26
- 90 briquetes covers an area apprimately 17 x 33
Made in USA
Part Number: CLA-AC0394
Material: ceramic
Weight: 7.65
Dimensions: 2 x 2
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA
.
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.
Part Number: 00220
Weight: 2.0
High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2 apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15 x 24.
- Top quality product
- Each briquette measure 2 x 2
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15 x 24
- 70 briquetes covers an area apprimately 17 x 26
- 90 briquetes covers an area apprimately 17 x 33
Made in USA
Part Number: CLA-AC0394
Material: ceramic
Weight: 7.65
Dimensions: 2 x 2
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
Dimensions: 16 x 4
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Rib & Roast Rack. Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.
Part Number: 41616
Material: stainless steel
Weight: 0.5
Stuffed Burger Press
The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.
Part Number: 24795
Weight: .3
|
Warm Morning G-3 (single post) - 02-Nov-26
|
We ship Warm Morning BBQ parts worldwide
Back to Warm Morning grill parts