Every Grease Tray we have

ash pan

Part Number: 03508
Dimensions: 27” x 13 1/4”
Material: aluminized steel
Weight: 8.4

Ash pan.

Part Number: 03509
Dimensions: 12 13/16” x 20 3/8”
Material: aluminized steel
Weight: 6.9

Replacement stainless steel grease pan with grease cup and holder. Includes side bracket and attached bottom heat shield (9 1/2” x 9 1/2”). Made in USA .

Part Number: 144-04013-R
Dimensions: 18 3/4” x 15 7/16”
Material: stainless steel
Weight: 4.20

Replacement stainless steel ash pan with small preassembled handle. Made in USA .

Part Number: 154-13104-R
Dimensions: 17 1/2” x 18 9/16”
Material: stainless steel
Weight: 4.15

Stainless steel replacement catch pan (grease tray) preassembled and removable. Replaces OEM # 200163. Includes mini grease cup and cup hanger. Made in USA .

Part Number: 200163-R
Dimensions: 10 1/8” x 25”
Material: stainless steel
Weight: 4.0

Genuine OEM Porcelain Grease Pan.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

GREASE SHIELD 250 .8MM 430 SS

Part Number: 27243-904
Dimensions: 8” x 13”
Weight: 1.0

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35

GREASE TRAY GPC

Part Number: 32551-27
Weight: 1.0

Genuine OEM #S15115 disposable grease pans. Package of 10. Each measures 4.75”x6”x1”.

Part Number: 50416
Dimensions: 4 3/4” x 6”
Material: aluminum
Weight: 0.25

GREASE PAN - 330/440/550

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

Grease tray 440; porcelain flatte matte finish.

Part Number: 57055-901
Dimensions: 6 3/4” x 25 7/16”
Material: porcelain steel
Weight: 1.25

AG2-600-R Holland 18 Gauge Aluminum Drip Pan. Sometimes called a Drip Pan Weld Assembly. Also known as HOLLDRIP, HGP160000.

This aftermarket part replaces original Holland Drip Pan AG2-600.

Part Number: AG2-600-R
Dimensions: 23” x 14 1/2”
Material: aluminum
Weight: 8.00

GREASE CUP GPB

Part Number: C155001
Weight: 1.0

GREASE PORCELAIN CUP WITH HANDLE

Part Number: C15511
Dimensions: 5 1/8” x 4 13/16”
Weight: 1.0

Flat bottom stainless steel drip pan. Includes grease cup holder and small grease cup. Made in USA .

Part Number: CLA-DG0090
Dimensions: 14 1/4” x 21 3/8”
Material: stainless steel
Weight: 3.20

Galvanized steel grease tray UNASSEMBLED by using one of our existing grease trays and attaching extension pieces to enlarge the tray; includes screws and nuts and instructions. Made in USA .

Part Number: CLA-DG0369
Dimensions: 13 1/8” x 26 5/8”
Material: galvanized steel
Weight: 4.05

Universal do-it-yourself grease tray enlargement kit. Unassembled, drill holes required, nuts & bolts not included. Uses our aluminized steel grease tray CLA-DG0084 that measures 9 5/8” x 22”. Eight extension pieces included. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements. Made in USA .

Part Number: CLA-DG0370
Material: galvanized steel
Weight: 4

Modified galvanized steel grease tray to replace discontinued OEM numbers 80002024 and G603-0500-01. You will be contacted before we process the order with more details since this is not an exact replacement. Made in USA .

Part Number: CLA-DG0416
Dimensions: 10 1/2” x 30 3/4”
Material: galvanized steel
Weight: 2.6

Stainless steel grease draining tray, far superior to the original painted steel tray.
* Stainless steel for long life
* Uses widely available throw away aluminum loaf pans (one supplied). Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0002
Dimensions: 15 3/4” x 31 7/8”
Material: stainless steel
Weight: 6.0

Stainless steel grease tray.

• Does not include welded mounting bracket for OEM lower heat shield.
• Grease tray modified to fit with lower heat shield part# CLA-MS0077.
• Original OEM heat shield can still be used but not a perfect fit.
• Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0075
Dimensions: 18 1/2” x 30 1/2”
Material: stainless steel
Weight: 6.6

Stainless steel grease pan. Includes grease cup and grease cup holder. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0099
Dimensions: 9 1/2” x 24 7/8”
Material: stainless steel
Weight: 3.0

Stainless steel grease pan. Includes grease cup and grease cup holder. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0099A
Dimensions: 9 3/4” x 27 1/8”
Material: stainless steel
Weight: 3.0

Heat Shield. Comes with one (1) disposable aluminum drip pan (AI000302). Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0102
Dimensions: 12 5/8” x 16”
Material: stainless steel
Weight: 1.9

Stainless steel grease tray. Hardware included, use old handle. Made in USA

Part Number: CLA-DS0122
Dimensions: 15 3/4” x 32 7/8”
Material: stainless steel
Weight: 4.55

Stainless steel grease tray. The tray measures 26 1/2” x 15 1/8” and the handle is 31 11/16” x 2”. Unassembled; includes bolts & lock nuts. Made in USA

Part Number: CLA-DS0168
Dimensions: 26 1/2” x 15 1/8”
Material: stainless steel
Weight: 6.0

Stainless steel grease tray. The front-to-back dimension of 17 1/4” does not include the handle. With the handle included, the overall dimension is 18”. Made in USA

Part Number: CLA-DS0184
Dimensions: 17 1/4” x 26 5/8”
Material: stainless steel
Weight: 5.2

Stainless steel grease tray. Includes grease cup and grease cup holder. Made in USA .

Part Number: CLA-DS0191
Dimensions: 8 5/8” x 24 1/2”
Material: stainless steel
Weight: 2.40

Stainless steel grease tray. Includes grease cup and grease cup holder. Made in USA .

NOTE: Install into back of grill with drain hole on right side.

Part Number: CLA-DS0219
Dimensions: 14 15/16” x 27 9/16”
Material: stainless steel
Weight: 4.9

Stainless steel grease tray. This is an unassembled two-piece tray. Unlike the original, it can be installed without disassembling the grill. Includes

• Two tray pieces: A left side, B right side
• Two grease cups
• Two grease cup holders
• All necessary nuts, bolts, and washers
• Assembly/installation instructions

Made in USA .

Part Number: CLA-DS0220
Dimensions: 14 3/4” x 31”
Material: stainless steel
Weight: 6.15

Stainless steel version of grease tray OEM # 50001301. NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA

Part Number: CLA-DS0226
Dimensions: 9 5/8” x 22 1/16”
Material: stainless steel
Weight: 2.25

Stainless steel grease tray; has drip hole and includes grease cup and grease cup holder. Made in USA .

Part Number: CLA-DS0248
Dimensions: 15” x 28 9/16”
Material: stainless steel
Weight: 4.5

Stainless steel grease draining tray with grease cup and holder. Made in USA .

Part Number: CLA-DS0269
Dimensions: 13 1/8” x 21 5/8”
Material: stainless steel
Weight: 3.05

Stainless steel grease draining tray assembly. Grease tray measures 19 x 17.5” and handle is 26.5” long. Made in USA . Assembly required. Includes

• CLA-DS0270A stainless tray
• CLA-DS0270B stainless handle
• Assembly Hardware

Part Number: CLA-DS0270
Dimensions: 20 7/8” x 26 1/2”
Material: stainless steel
Weight: 4.4

Stainless steel grease tray (grease slide panel bottom); includes grease cup and grease cup holder. Replacement for OEM # 20001127A0. Made in USA

Part Number: CLA-DS0274
Dimensions: 8 1/4” x 27 5/8”
Material: stainless steel
Weight: 2.45

Stainless steel grease tray. Includes handle, grease shield and hardware; unassembled. Made in USA .

Part Number: CLA-DS0275
Dimensions: 20 1/4” x 23 1/4”
Material: stainless steel
Weight: 8.10

Stainless steel grease draining tray with grease cup and holder. Made in USA .

Part Number: CLA-DS0276
Dimensions: 15 3/4” x 26 7/8”
Material: stainless steel
Weight: 4.6

Grease pan with a new design made of stainless steel and not an exact duplicate of the original; is a fully functional replacement. Includes grease cup and grease cup holder. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0279
Dimensions: 7 1/8” x 19 5/16”
Material: stainless steel
Weight: 2.7

Stainless steel grease pan and handle. Made in USA

Part Number: CLA-DS0281
Dimensions: 17 3/16” x 24 1/4”
Material: stainless steel
Weight: 4.65

Stainless steel drip tray - grease collection pan; no drain hole in the tray and no grease cup. Replaces OEM # P3018-00-1002. Made in USA

Part Number: CLA-DS0297
Dimensions: 11 13/16” x 7 7/16”
Material: stainless steel
Weight: 1.3

Stainless steel grease tray; is pre-assembled and includes 3 mini loaf pans for easy disposal of grease. Replaces OEM # 20002395A0. Made in USA

Part Number: CLA-DS0301
Dimensions: 14 1/8” x 25 1/2”
Material: stainless steel
Weight: 4.55

Stainless steel small drip tray holder with handle that uses common mini loaf pan for easy disposal of grease; includes 3 mini loaf pans. Made in USA

Part Number: CLA-DS0304
Dimensions: 7” x 4 15/16”
Material: stainless steel
Weight: 0.3

Stainless steel charcoal drip tray (OEM TR028) and gas drip tray (OEM 47183T-30) with handle. Can be used for either purpose as a replacement, however it does not include a drip hole as in the original gas drip tray. Clean tray periodically for a longer life. Made in USA

NOTE: For model SH7000 charcoal drip tray OEM# SH7000-3, please measure & compare to your old tray to make sure this is the correct size for your model.

Part Number: CLA-DS0305
Dimensions: 17 7/8” x 20 1/4”
Material: stainless steel
Weight: 3.9

Stainless steel grease pan. Includes three common mini loaf pans. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0307
Dimensions: 13” x 22 3/4”
Material: stainless steel
Weight: 2.9

Unassembled Stainless steel grease tray with handle and hardware. Made in USA

Part Number: CLA-DS0309
Dimensions: 20 3/4” x 20 3/4”
Material: stainless steel
Weight: 4.5

Stainless steel grease pan with mini grease cup & holder. Made in USA . NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0328
Dimensions: 9 1/2” x 20 1/2”
Material: stainless steel
Weight: 2.15

Stainless steel drip tray. Replaces OEM # HW01366A-05-10-00. Includes a mini grease bucket and a grease cup holder that can also be used with a common empty vegetable can. Made in USA .

Part Number: CLA-DS0331
Dimensions: 13” x 18”
Material: stainless steel
Weight: 2.65

Stainless custom made ash pan with handle. Measures 18 1/4” x 27 1/2” without handle. Made in USA
WARNING: Before ordering this ash tray, remove the old tray and measure and compare to our tray. Also, verify your model number on the certification of your grill. The ash trays for models MFJ576DNC and MFJ576CNC are not interchangeable; it best to shop by model number.

Part Number: CLA-DS0398
Dimensions: 18 1/4” x 27 1/2”
Material: stainless steel
Weight: 6.85

Universal 15”x4” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MG0371
Material: galvanized steel
Weight: 0.45

Universal 8”x4” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MG0372
Material: galvanized steel
Weight: 0.25