Broilmaster D2-L

Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 10502-70401
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 3.0

Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.

Part Number: 10502
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.5

Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.

This is the last 22102 burner we have.

Part Number: 22102-72102
Dimensions: 17 1/8” x 9 1/2”
Material: cast iron
Weight: 11.0

Cast iron bowtie burner for twin venturi grills for Broilmaster model D2-L.

Part Number: 22102
Dimensions: 17 1/4” x 9 1/2”
Material: cast iron
Weight: 10.13

Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 20502-70401
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 8.0

cast iron burner head for Broilmaster model D2-L.

Part Number: 20502
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 7.7

Gasket kit. Round gasket fits all dual cast iron bowtie burners.

Part Number: DHK-3
Weight: 0.1

Stainless steel burner and venturi assembly kit. Contains one standard EDSB SS H burner and two V-12 adjustable universal venturis.

Part Number: EDSB+V-12
Dimensions: 7 1/4” x 15 1/2”
Material: stainless steel
Weight: 2.0

Straight adjustable single venturi.

• Adjusts from 7” to 10”.
• Requires minimum 1 7/8” hole in grill bottom for venturi to pass thru. For grills with smaller holes, see venturi part# 72401.
• Can be used in pairs for twin venturi applications.

. Includes all necessary gaskets and screws/nuts.

Part Number: 70401
Dimensions: 10
Material: zinc plated steel
Weight: 0.6

straight fixed twin venturi. Includes all necessary gaskets and screws/nuts.

Part Number: 72102
Dimensions: 8 1/4
Material: zinc plated steel
Weight: 0.7

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

Universal stainless venturi flexible and adjustable from 8” to 11” and sold individually. Used to replace venturis for virtually any grill model for which no exact fit venturi is available. Gasket & screws not included, see part numbers 00400 or SHK4.

Part Number: 72401
Dimensions: 7 1/2” x 11”
Material: zinc plated steel
Weight: 0.3

two venturi gaskets with screws for Broilmaster model D2-L.

Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05

Single Gasket Kit Economy Burners for Broilmaster model D2-L.

Part Number: SHK4
Weight: 0.01

Chrome plated cooking grid. Made in USA .

Part Number: CG-6
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 20”
Material: Chrome steel
Weight: 2.9

Rock grate for holding lava rock or ceramic briquettes for Broilmaster model D2-L.

Part Number: BG-18
Dimensions: 11 1/2” x 18 1/4”
Material: carbon steel
Weight: 2.5

Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03900
Material: ceramic
Weight: 0.2

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

In post control valve without manifold or orifice, accepts accepts common 5/16” x 32 spud orifice. Fits Arkla and most twin in post control grills with spud orifice. Orifice not included.

Part Number: 38700
Dimensions: 3 1/8” x 1 3/8”
Material: brass
Weight: 0.3

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1