Home > Weber Grill Models > Weber Platinum II
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Weber grill.
Replacement gas grill parts for Weber model: Platinum II
Platinum II Burners
Front or rear stainless steel burner for Weber model Platinum II.
Part Number: 12801
Dimensions: 29 1/8” x 1”
Material: stainless steel
Weight: 1.3
$31.96
Stainless steel burner kit. Includes:
- Two 29 1/8” tube burners for front and rear
- One 28 7/16” center tube burner
- One 13 1/2” stainless cross-over bar
- Spider exclusion screens on all burners
Part Number: 128C4
Dimensions: 29 1/8” x 13 1/2”
Material: stainless steel
Weight: 2.10
$81.20
Stainless steel cross over tube for Weber model Platinum II.
Part Number: 129C1
Dimensions: 13 1/2
Material: stainless steel
Weight: 0.13
$13.92
Stainless steel center burner for Weber Genesis I-IV. See part# WTB1 for complete burner kit.
Part Number: WTB-C
Dimensions: 29 1/8”
Material: stainless steel
Weight: 1.0
$31.96
Platinum II Flavor Bars
Stainless steel replacement Flavor Bars for Weber Genesis. Constructed of heavy gauge stainless for long life, they are far superior to porcelain coated bars. Set of 13 pieces, five at 23 3/8”, eight at 15 7/8”.
Part Number: WFB
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 23 3/8”
Material: stainless steel
Weight: 11.4
$94.11
Platinum II Flavorizer Bars
13-pc porcelain steel Flavorisor Bars. Set of 13.
Part Number: 99813
Dimension Front-to-Back: 23 3/8”
Dimension Side-to-Side: 15 7/8”
Material: porcelain steel
Weight: 12.6
$93.15
Platinum II Igniter Components
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Part Number: 03120
Weight: 0.1
$9.77
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04800
Material: ceramic
Weight: 0.2
$11.77
Snap In
Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-9B
Weight: 0.2
$8.38
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Platinum II Knobs and Handles
Control knob with long shaft.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 5/8”
- Socket diameter: 8mm
- Knob shaft: 1 1/4”
Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1
$6.06
Platinum II Warming Racks
Chrome steel warming rack for Weber model Platinum II.
Part Number: 02345
Dimensions: 24 7/8” x 4 5/8”
Material: chrome steel wire
Weight: 1.8
$21.54
Chrome steel warming rack. This part is 24 3/8” at is absolute longest. The rack itself is 23”.
Part Number: 02346
Dimensions: 24 3/16” x 3 11/16”
Material: chrome steel wire
Weight: 1.4
$27.64
Platinum II Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57