Heat Plates for Aussie grills

Porcelain steel Heat Distribution Plate for some Aussie grills. Sold individually.

Part Number: 92311
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 0.63

Universal adjustable stainless steel heat plate/Flame Tamer for some Aussie grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Aussie grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

Porcelain steel Heat Distribution Plate for some Aussie grills. Sold individually.

Part Number: 94281
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0

Flame Diffuser for some Aussie grills. Porcelain enameled, glossy finish.

Part Number: 96051
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/16”
Material: porcelain steel
Weight: 2.0

Porcelain steel Flavor Activator for some Aussie grills. Sold individually.

Part Number: 96121
Dimension Front-to-Back: 25 3/8”
Dimension Side-to-Side: 7 1/8”
Material: porcelain steel
Weight: 2.8

Porcelain steel Flavor Activator for some Aussie grills. Sold individually.

Part Number: 96301
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 6 1/8”
Material: porcelain steel
Weight: 1.5

Porcelain steel heat plate for some Aussie grills. Sold individually.

Part Number: 96411
Dimension Front-to-Back: 19 9/16”
Dimension Side-to-Side: 7”
Material: porcelain steel
Weight: 1.6

Stainless steel Heat Distribution Plate for some Aussie grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.66

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for some Aussie grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64

Stainless steel heat plate/Flame Tamer for some Aussie grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0150
Dimension Front-to-Back: 19 5/8”
Dimension Side-to-Side: 7 1/8”
Material: stainless steel
Weight: 3.2

Stainless steel Flame Tamer for some Aussie grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 0.90

SET OF THREE/3 PACK Stainless steel Flame Tamer for some Aussie grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 2.7

SET OF FOUR/4 PACK Stainless steel Flame Tamer for some Aussie grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186-X4
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 3.6