Aussie 6805-8SSS1 (Vantage 6805)

Home > Aussie Grill Models > Aussie 6805-8SSS1

Vantage 6805 Stainless Steel 4-Burner Propane Gas Grill, with Searing Burner

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Aussie grill.

Part diagrams and owners manuals for Aussie model: 6805-8SSS1 (Vantage 6805)

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Grill image for model: 6805-8SSS1 (Vantage 6805)

Replacement grill parts to fit Aussie model: 6805-8SSS1 (Vantage 6805)

6805-8SSS1 (Vantage 6805) Burners

Stainless steel burner for Aussie model 6805-8SSS1.

Part Number: 16801
Dimensions: 17 3/8” x 1”
Material: stainless steel
Weight: 0.8

$32.95

All Aussie Burners

6805-8SSS1 (Vantage 6805) Heat Distribution Plates

Porcelain steel Heat Distribution Plate. Sold individually.

Part Number: 92311
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 0.63

$26.50

$21.77

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64

$77.52

Stainless steel Heat Distribution Plate. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.66

$22.29

All Aussie Heat Distribution Plates

6805-8SSS1 (Vantage 6805) Igniter Components

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

$31.52

Universal four-outlet battery powered push button ignitor.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$31.50

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

$18.48

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06840
Dimensions: 5 7/8
Material: ceramic
Weight: 0.7

$14.03

All Aussie Igniter Components

6805-8SSS1 (Vantage 6805) Heat indicators and Meat Thermometers

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

$9.95

All Aussie Heat indicators and Meat Thermometers

6805-8SSS1 (Vantage 6805) Accessories

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

$6.64

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

$16.59

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Aluminum foil grilling trays. Package of three.

Heavy duty aluminum foil
Re-usable
Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3

$6.73

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, April 4, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.