Backyard Grill BY12-084-029-79

Stainless steel burner for Backyard Grill model BY12-084-029-79.

Replaces Backyard Grill factory part# 55-09-118

Part Number: 183L1
Dimensions: 13 3/4” x 5 1/2”
Material: stainless steel
Weight: 0.7

Stainless steel burner for Backyard Grill model BY12-084-029-79.

Replaces Backyard Grill factory part# 55-09-119

Part Number: 183R1
Dimensions: 13 3/4” x 5 1/2”
Material: stainless steel
Weight: 0.7

Porcelain steel cooking grid. Porcelain enameled, glossy finish. Sold individually.

Part Number: 59211
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 25”
Material: porcelain steel bar
Weight: 4.0

Porcelain steel Heat Plate. Sold individually.

Replaces Backyard Grill factory part# 55-07-319

Part Number: 97331
Dimension Front-to-Back: 21 3/4”
Dimension Side-to-Side: 11 3/4”
Material: porcelain steel
Weight: 3.2

Stainless steel aftermarket Heat Plate.

• Stainless equivalent of part 97331
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually

Part Number: 97331-SS
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 21 3/4”
Material: stainless steel
Weight: 2.2

This stainless steel version of UFHP1 Heat Plate replaces the original porcelain steel plate for Backyard Grill model BY12-084-029-79.

Part Number: UFHP1-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 25”
Material: stainless steel
Weight: 2.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Backyard Grill factory part# 55-07-321

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal battery powered push button ignitor.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Backyard Grill factory part# 55-07-322

Part Number: 03350
Weight: 0.7

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

Burner mounted electrode. Mounts to flange on underside of burner.

• Ceramic insulator
• Mounting bracket with nut and bolt
• 8” wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04820
Material: ceramic
Weight: 0.1

Universal black control knob. Counter-clockwise bezel.

• Off position D-Value: Selectable
• Knob diameter: 2 1/16”
• Socket diameter: 8mm
• Knob shaft: None

Replaces Backyard Grill factory part# 55-10-126

Part Number: 01800
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces Backyard Grill factory part# 55-08-128

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

heat indicator for Backyard Grill model BY12-084-029-79.

Replaces Backyard Grill factory part# 55-22-037

Part Number: 00017
Dimensions: 3 3/4” x 1 7/8”
Weight: 0.1

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3