Home > Backyard Grill Grill Models > Backyard Grill GBC1562WD-C
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Backyard Grill grill.
Part diagrams and owners manuals for Backyard Grill model: GBC1562WD-C
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Backyard Grill model: GBC1562WD-C
GBC1562WD-C Burners
Stainless steel burner for Backyard Grill model GBC1562WD-C.
Replaces Backyard Grill factory part# 55-23-053
Part Number: 19991
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6
$33.45
GBC1562WD-C Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Replaces Backyard Grill factory part# 55-23-050
Part Number: 61593
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 29 5/8”
Material: gloss cast iron
Weight: 11.3
$78.11
GBC1562WD-C Heat Plates
Porcelain steel
Heat Plate. Sold individually.
Replaces Backyard Grill factory part# 55-24-541
Part Number: 91591
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8
$25.40 $16.99
Stainless steel aftermarket flame tamer
heat plate.
- Stainless equivalent of part 91591
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 91591-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 1.0
$27.99 $17.21
GBC1562WD-C Igniter Components
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
GBC1562WD-C Grease Trays
Stainless steel grease tray; has drip hole and includes grease cup and grease cup holder. Made in USA
.
Replaces Backyard Grill factory part# 55-23-061
Part Number: CLA-DS0248
Dimensions: 15” x 28 9/16”
Material: stainless steel
Weight: 4.5
$99.95 $59.97
GBC1562WD-C Knobs and Handles
Universal 2 5/16” knob.
- Selectable D-Value
- Selectable socket diameter - 6mm or 8mm.
- Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
- Includes 6 shaft inserts and set screw.
- Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).
Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20
$16.93
GBC1562WD-C Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Replaces Backyard Grill factory part# 55-24-540
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
$15.11
GBC1562WD-C Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73