Barbeques Galore G3T

SKU 10185-X3 Cast iron burners. SET OF THREE (3) burners.

Fits Turbo G3T & G3TN 3-Burner grill models.

This aftermarket part replaces original Turbo burner part SKU 10185.

See SKU-10185-SS for a premium cast stainless steel burner that is far superior to the original cast iron and will last much longer.

Part Number: SKU-10185-X3
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 4.2

SKU-184788-X3 Cast Stainless Steel Burners. SET OF THREE (3). Upgrade burner for Barbeques Galore brands Turbo, Capt'n Cook, Cook-On and Bar-B-Chef. Far superior to the cast iron burners it replaces, this burner is 100% cast stainless steel and will probably outlast your grill.

Fits the following Turbo grill Models:

• G3T & G3TN 3-Burner
• G4T & G4TN 4-Burner
• G5T & G5TN 5-Burner

Available in more economical 2, 3, 4 and 5 burner multi-packs.

This aftermarket part replaces original OEM cast stainless steel burner part SKU-184788.

Part Number: SKU-184788-X3
Dimensions: 16” x 2 5/8”
Material: cast stainless steel
Weight: 9.6

SKU-184788 Cast Stainless Steel Burner. Upgrade burner for Barbeques Galore brands Turbo, Capt'n Cook, Cook-On and Bar-B-Chef. Far superior to the cast iron burners it replaces, this burner is 100% cast stainless steel and will probably outlast your grill.

Fits the following Turbo grill Models:

• G3T & G3TN 3-Burner
• G4T & G4TN 4-Burner
• G5T & G5TN 5-Burner

Also available in more economical 2, 3, 4 and 5 burner multi-packs.

This aftermarket part replaces original OEM cast stainless steel burner part SKU-184788.

Part Number: SKU-184788
Dimensions: 16” x 2 5/8”
Material: cast stainless steel
Weight: 3.20

SKU-14363-SS-SET Premium quality heavy duty stainless steel cooking grill set for Turbo G3T and G3TN 3-Burner grills. SET OF TWO (2) Stainless Cooking Grills.

This aftermarket 2-piece stainless steel set replaces two pieces of the original cast iron Turbo part SKU 14363.These commercial grade stainless grills are far superior to the cast iron grills they replace, and will last much,much longer. They will probably outlast your grill.

Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, 8 pounds of solid stainless each.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Each panel measures:

• Front-to-Back: 19 1/4”
• Side-to-Side: 12 1/2”

Total Side-to-Side:25"

Part Number: SKU-14363-SS-SET
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12 1/2”
Material: stainless steel
Weight: 16.0

SKU-14363-SET1 Cast iron cooking grids. SET OF TWO (2). Porcelain enameled, glossy finish.

Fits Turbo G3T and G3TN 3-Burner grills.

This aftermarket 2-piece set replaces 2 pieces of the original cast iron Turbo part SKU 14363

See part SKU-14363-SS-SET for a premium quality, commerciasl grade stainless steel grid set.

Each panel measures:

• Front-to-Back: 19 1/4”
• Side-to-Side: 12 3/8”

Total Side-to-Side: 24 3/4”

Part Number: SKU-14363-CI-SET1
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 24 3/4”
Material: gloss cast iron
Weight: 13.10

SKU-11230 Rock Grate 3-Burner.

Fits Turbo G3T and G3TN 3-Burner grills SKU 10757 and 10759.

This after market part replaces original Turbo rock grate SKU# 11230.

Part Number: SKU-11230
Dimensions: 17 1/2” x 23 1/2”
Material: carbon steel
Weight: 6.0

Ignitor collector box with ceramic electrode and male round connector.

• Wire not included. Commonly used with wire part# 03400.
• Designed to connect to wires with round female connector.
• If used with existing wire, confirm connector type is round where wire connects to electrode.

See part 02623-X4 for a more econimical 4 pack.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02623
Material: ceramic
Weight: 0.2

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Replaces Barbeques Galore factory part# SKU-12547

Part Number: 03120
Weight: 0.1

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 24” hardwood front lid handle. Designed to bolt through existing lid holes, if present. Sliding mounting hardware can adjust to holes up to 23” apart.

Part Number: 01200
Dimensions: 24
Material: Wood
Weight: 0.8

Universal 2 5/16” knob.

• Selectable D-Value
• Selectable socket diameter - 6mm or 8mm.
• Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
• Includes 6 shaft inserts and set screw.
• Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

Universal stainless steel lid handle. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0

Deluxe lid mounted heat indicator with chrome trim. Requires three holes, two mounting holes plus center hole. Indicator is about 2 11/16” wide and 2 5/16” tall. Mounting bolts are 1 1/2” on center.

Replaces Barbeques Galore factory part# SKU-12077

Part Number: 21217
Dimensions: 2 11/16” x 2 5/16”
Material: stainless steel
Weight: 0.1

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3