Bass Pro Shops BB10769A

Stainless steel tube burner.

Includes
• SS tube burner
• Electrode mounting bracket (not all models use bracket)
• Spider exclusion screen
• Adjustable air shutter.

NOTE:Some earlier versions of this burner, which are no longer available, were a bit larger in diameter.

Part Number: 12411
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.6

Stainless steel burner mounting bracket with integrated gas carryover tubes. Please remove your old bracket and compare these details. Also review CLA-MS0180 to confirm the correct bracket for your grill.

• Cross over tubes measure 5 3/8”
• Mounting holes are round and about 7 1/8” apart, center to center
• Back mounting side ”flips” up
• When installed, cross over tubes are on top

Made in USA

Part Number: CLA-MS0092
Dimensions: 17 3/8
Material: stainless steel
Weight: 0.84

Stainless steel burner mounting bracket with integrated gas carryover tubes. Please remove your old bracket and compare these details. Also review CLA-MS0092 to confirm the correct bracket for your grill.

• Cross over tubes measure 5 3/4”
• Mounting holes are oblong and about 7 1/2” apart, center to center
• Back mounting side ”flips” down
• When installed, cross over tubes are on top

Made in USA

Part Number: CLA-MS0180
Dimensions: 17 3/8
Material: stainless steel
Weight: 0.90

Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 67692
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 26”
Material: matte cast iron
Weight: 13.2

Stainless steel heat plate for Bass Pro Shops model BB10769A.

Part Number: BBQHP1
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7

Stainless steel Flame Tamer. Made in the USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: CLA-TS0137
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 5/16”
Material: stainless steel
Weight: 1.19

Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Universal 2 5/16” knob.

• Selectable D-Value
• Selectable socket diameter - 6mm or 8mm.
• Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
• Includes 6 shaft inserts and set screw.
• Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7