BBQ Grillware GSC2418N

Stainless steel tube burner.

Includes
• SS tube burner
• Electrode mounting bracket (not all models use bracket)
• Spider exclusion screen
• Adjustable air shutter.

NOTE:Some earlier versions of this burner, which are no longer available, were a bit larger in diameter.

Part Number: 12411
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.6

Premium quality stainless steel tube burner.

NOTE:Some earlier versions of this burner, which are no longer available, were a bit larger in diameter.

NOTE: This burner does not have the electrode mounting tab required on newer grill models. For newer grill models that require the electrode mounting tab, see part# CLA-BS0196. Visually check your burner to determine which burner type you need. Burners with the electrode mounting bracket can be used in both grill types.

Includes:
• Stainless steel burner
• Adjustable air shutter
• Spider exclusion screen

Part Number: CLA-BS0210
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.5

Stainless steel tube burner for BBQ Grillware model GSC2418N.

Part Number: BBQT1
Dimensions: 16 1/2
Material: stainless steel
Weight: 0.5

Stainless steel burner support bracket. Made in USA .

Part Number: CLA-MS0172
Dimensions: 21 1/4”
Material: stainless steel
Weight: 0.95

Cast iron cooking grids. SET OF TWO (2) panels.

• Porcelain treated, matte finish
• Each panel measures 17 3/4” x 11 1/2”
• Overall dimensions: 17 3/4” x 23”

Part Number: CG-101PCI-X2
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 23”
Material: cast iron
Weight: 11.6

Cast iron cooking grids. SET OF THREE (3) panels.

• Porcelain treated, matte finish
• Each panel measures 17 3/4” x 11 1/2”
• Overall dimensions: 17 3/4” x 34 1/2”

Part Number: CG-101PCI-X3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 34 1/2”
Material: cast iron
Weight: 17.4

Stainless steel heat plate for BBQ Grillware model GSC2418N.

Part Number: BBQHP1
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7

Stainless steel Flame Tamer. Made in the USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: CLA-TS0137
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 5/16”
Material: stainless steel
Weight: 1.19

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Universal 2 5/16” knob.

• Selectable D-Value
• Selectable socket diameter - 6mm or 8mm.
• Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
• Includes 6 shaft inserts and set screw.
• Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

Heat plate bracket, stainless steel. Made in USA

Part Number: CLA-MS0288
Dimensions: 23
Material: stainless steel
Weight: .75

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7