Home > Broil King Grill Models > Broil King 9123-84NZ
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement BBQ grill parts for Broil King model: 9123-84NZ
9123-84NZ Burners
Genuine OEM Broil King stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Broil King Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
9123-84NZ Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 12 3/4
Material: cast iron
Weight: 6.75
Image not available
$43.13
9123-84NZ FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave for Broil King model 9123-84NZ.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.14
$21.93
9123-84NZ Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Broil King electronic push-button 4-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
$18.48
Genuine OEM Broil King electrode with 14 3/8 connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
Genuine OEM Broil King 32 wire for side burner and other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
9123-84NZ Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2 x 6
Material: stainless steel
Weight: .35
$7.60
Grease tray 440; porcelain flatte matte finish for Broil King model 9123-84NZ.
Part Number: 57055-901
Dimensions: 6 3/4 x 25 7/16
Material: porcelain steel
Weight: 1.25
$27.24
Genuine OEM Broil King Porcelain Grease Pan for Broil King model 9123-84NZ.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
9123-84NZ Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2 apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil King model 9123-84NZ.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8
- Socket diameter: 5/16
- Knob shaft: 1/2
Part Number: 10472-K231
Weight: 0.1
$5.15
DOOR HANDLE RESIN * for Broil King model 9123-84NZ.
Part Number: 21475-138
Weight: 1.0
$6.73
9123-84NZ Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
9123-84NZ Wheels and Castors
CASTER BRACKET 21 3/4 LONG for Broil King model 9123-84NZ.
Part Number: 21039-911
Weight: 2.05
Image not available
$18.50
Rubber castor, 3 w/plate, locking for Broil King model 9123-84NZ.
Part Number: 10892-23
Weight: 0.66
$6.87
9123-84NZ Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8 and front support rod 26 3/16 warming rack 7 3/8 x 25) for Broil King model 9123-84NZ.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
9123-84NZ Valves, Orifices, and Manifolds
CONTROL ASSY 4V S/B R/B LP + for Broil King model 9123-84NZ.
Part Number: 59005-074
Weight: 1.0
Image not available
$101.63
9123-84NZ Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 1 7/8 wide and 1 7/16 high. The threaded stem is about 5/16 diameter and 1 1/8 long.
Part Number: 10571-5
Dimensions: 1 7/8 x 1 7/16
Weight: 0.1
$15.11
9123-84NZ Miscellaneous Repair Parts
Hinge pin clip for Broil King model 9123-84NZ.
Part Number: S21233
Weight: 0.01
$1.08
REAR BURNER SPRING for Broil King model 9123-84NZ.
Part Number: S21362
Weight: 1.0
$1.08
Washer for Broil King model 9123-84NZ.
Part Number: S21255
Weight: 0.01
$1.08
9123-84NZ Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9123-84NZ.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Broil King model 9123-84NZ.
Part Number: Y-11231
Weight: 0.01
$1.08
9123-84NZ Side Burners
SIDE BURNER GRID BLK 330/440/550. Grid for side burner. 9 diameter round and has two support prongs. Porcelain coated, glossy finish.
Note: Some owners manuals incorrectly list this part as 53139-98.
Part Number: 53140-981
Weight: .8
Image not available
$18.38
9123-84NZ Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9 x 13
Weight: 0.4
$8.64
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31