Home > Broil King Grill Models > Broil King 9123-87NZ
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement grill parts to fit Broil King model: 9123-87NZ
9123-87NZ Burners
Genuine OEM Broil King stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Broil King Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
9123-87NZ Cooking Grids
Genuine OEM Broil King
cooking grid.
Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)
Part Number: 52007-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 6 5/16”
Material: cast iron
Weight: 3.10
$33.20
9123-87NZ FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave for Broil King model 9123-87NZ.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
9123-87NZ Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Broil King push-button electronic ignitor.
- 5 spark outlets (spade connectors)
- Uses AAA battery (not included)
- Requires 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-251
Weight: 0.5
$19.43
Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
Genuine OEM Broil King 32” wire for side burner and other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
9123-87NZ Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
Genuine OEM Broil King Porcelain Grease Pan for Broil King model 9123-87NZ.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
9123-87NZ Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil King model 9123-87NZ.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
9123-87NZ Regulators and Hoses
Genuine OEM Broil King NG gas hose for Broil King model 9123-87NZ.
Part Number: 10111-K45
Weight: 2.1
$88.64
9123-87NZ Wheels and Castors
CASTER BRACKET 21 3/4” LONG for Broil King model 9123-87NZ.
Part Number: 21039-911
Weight: 2.05
Image not available
$18.50
Rubber castor, 3” w/plate, locking for Broil King model 9123-87NZ.
Part Number: 10892-23
Weight: 0.66
$6.87
9123-87NZ Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Broil King model 9123-87NZ.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
9123-87NZ Valves, Orifices, and Manifolds
VALVE ASSY 440 S/B R/B NG for Broil King model 9123-87NZ.
Part Number: 59005-077
Weight: 1.0
Image not available
$98.25
9123-87NZ Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
9123-87NZ Miscellaneous Repair Parts
Hinge pin clip for Broil King model 9123-87NZ.
Part Number: S21233
Weight: 0.01
$1.08
REAR BURNER SPRING for Broil King model 9123-87NZ.
Part Number: S21362
Weight: 1.0
$1.08
9123-87NZ Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9123-87NZ.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Broil King model 9123-87NZ.
Part Number: Y-11231
Weight: 0.01
$1.08
9123-87NZ Side Burners
COVER SIDE BURNER BLACK for Broil King model 9123-87NZ.
Part Number: 23000-251
Dimensions: 14 1/4” x 11 3/16”
Weight: 1.80
$10.97
SIDE BURNER GRID BLK 330/440/550. Grid for side burner. 9” diameter round and has two support prongs. Porcelain coated, glossy finish.
Note: Some owners manuals incorrectly list this part as 53139-98.
Part Number: 53140-981
Weight: .8
Image not available
$18.38
9123-87NZ Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73