Broil King 983183

Rear burner tubular with deflector; includes collector box, electrode and connector wire for Broil King model 983183.

Part Number: 27906-354
Dimensions: 32
Weight: 1.0

Genuine OEM Broil King Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

Genuine OEM Broil King cooking grid. Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)

Part Number: 52007-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 6 5/16”
Material: cast iron
Weight: 3.10

COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)

Part Number: 52002-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 12 3/4”
Material: cast iron
Weight: 6.75

Genuine OEM Broil King stainless steel Flav-R-Wave for Broil King model 983183.

Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14

COLLECTOR BOX ASSEMBLY 625

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 52226-014A
Weight: 1.0

ELECTRODE - REAR BURNER

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: S15509
Weight: 0.1

Genuine OEM Broil King push-button electronic ignitor.

• 5 spark outlets (spade connectors)
• Uses AAA battery (not included)
• Requires 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-251
Weight: 0.5

Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-E13
Weight: 0.05

Genuine OEM Broil King 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35

GREASE PAN - 330/440/550 for Broil King model 983183.

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

Genuine OEM Broil King Porcelain Grease Pan for Broil King model 983183.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil King model 983183.

Part Number: 10472-K431
Weight: 0.1

CONTROL KNOB SMALL W/BA STRIP.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 10472-K231
Weight: 0.1

Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

REAR BURNER SPRING for Broil King model 983183.

Part Number: S21362
Weight: 1.0

Cotter pin for Broil King model 983183.

Part Number: Y-11230
Weight: 0.01

Hinge pin clip for Broil King model 983183.

Part Number: S21233
Weight: 0.01

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 983183.

Part Number: Y-12835
Weight: 1.0

LID BUMPER for Broil King model 983183.

Part Number: Y-11231
Weight: 0.01

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1