Heat Plates for Broilmaster grills

Universal adjustable stainless steel heat plate/Flame Tamer for some Broilmaster grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Broilmaster grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models for some Broilmaster grills.

Genuine Broilmaster fatory part. Also known as DPP7SS.

Part Number: B063065
Weight: 1.0

Burner Shield for T3 for some Broilmaster grills.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive SPRING 24.

Part Number: B101154
Weight: 1.0

Flare Buster Flat Ceramic Flavor Enhancer Pad for some Broilmaster grills. Sold individually.

Part Number: B101407
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Weight: .35

Stainless steel Flame Tamer assembly for some Broilmaster grills.

• Replaces Broilmaster part# SB142101-2200
• Assembly required (see photos)
• Sold individually.
• Shipped with protective peel-off coating, remove before use.M
• Must be assembled as shown in photos. See location of mounting holes.
• Made in USA .

..

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0088
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 6 3/4”
Material: stainless steel
Weight: 1.3

Flare Busters Flat Ceramic Pads for some Broilmaster grills. For P3, T3, D3, H3. Package of 12. Each tile measures 7 1/4 ” x 3 1/2”. Used with B101061 rack.

Part Number: DPA116
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Material: ceramic
Weight: 4.5

Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces for some Broilmaster grills. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen.

Part Number: DPA117
Material: ceramic
Weight: 4.6

Genuine OEM Broilmaster stainless steel heat and wind deflection shield for some Broilmaster grills. Also replaces part# DPP6SS, B068977 and B063065.

Part Number: DPP7SS
Dimension Front-to-Back: 8”
Dimension Side-to-Side: 16 11/16”
Material: Stainless steel
Weight: 1.10

Aluminized steel radiation shield for G3, G3TX, S3, and U3 for some Broilmaster grills. See part RSGSS for high quality stainless version of this part.

Part Number: RSG3
Dimension Front-to-Back: 8”
Dimension Side-to-Side: 16 3/4”
Material: aluminized steel
Weight: 2.0

WIND SHIELD BACK BURNER for some Broilmaster grills.

Part Number: SB1419013309
Weight: 1.0

Flame tamer, sold individually, two (2) required for some Broilmaster grills.

Part Number: SB1419014130
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 0.6

Flame Tamer for some Broilmaster grills. Now stainless steel, original was porcelain steel as shown in photo. Fits SBG2500.

Part Number: SBB00052
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.45

Stainless steel Flame Tamer , fits SBB2804 for some Broilmaster grills.

Part Number: SBB00102
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 0.95

Burner hood (heat plate) for some Broilmaster grills. Sold individuallly, Use one per main burner.

Part Number: SSG022
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 2 3/4”
Material: stainless steel
Weight: 0.8