Home > Broilmaster Grill Models > Broilmaster H4XN
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broilmaster grill.
Replacement grill parts to fit Broilmaster model: H4XN
H4XN Burners
B101618 Burner and venturi assembly. Fits H4X series grills. Includes all necessary gaskets and screws.
Genuine Broilmaster factory part. Also knwn as part# DPP115.
Note: H4X Models 2012 require collector Box Kit DPP116.
Part Number: B101618
Weight: 1.0
Image not available
$97.49
H4XN Cooking Grids
B101492 Stainless steel single level cooking grids for H4 series grills. SET OF TWO (2) grids.
Genuine Broilmaster factory part. Also known as DPA114.
Part Number: B101492
Weight: 1.8
$102.67
H4XN Rock Grates
Briquet Rack - premium grade stainless steel rods. Originally, this briquet rack was made of
porcelain enameled steel rods. Fits P4/D4. See part
DPA117 for Ceramic Flare Busters.
Part Number: B067449
Dimensions: 12 1/2” x 20 1/8”
Material: porcelain steel
Weight: 4.8
$41.75
H4XN Heat Plates
B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models.
Genuine Broilmaster fatory part. Also known as DPP7SS.
Part Number: B063065
Weight: 1.0
$40.30
Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen.
Part Number: DPA117
Material: ceramic
Weight: 4.6
$73.33
H4XN Igniter Components
Electronic ignitor head with two (2) male
spade connectors. Fits 3/P4/P5/D3/D4
- Uses 1 AA battery (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B072218
Weight: 0.2
$31.50
Ground Wire, Fits All Electronic Models
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B072684
Weight: 0.1
$6.50
Ground Lug, Fits All Models
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B069747
Weight: 0.01
$3.35
Collector Box Spacer, Fits P 3/4 D 3/4/5
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B069743
Weight: 0.01
$4.93
Collector Box (Electronic Ignitor), electrode, & connector wire with female spade end. Fits P3/P4
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B100446
Weight: 0.2
$27.72
H4XN Knobs and Handles
Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.
- Off position D-Value: 3 o'clock
- Knob diameter: 1 5/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: B070084
Weight: 0.04
$10.64
H4XN Heat indicators and Meat Thermometers
Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers. Stainless steel case.
Part Number: TG-2B
Weight: 0.2
$11.37
H4XN Accessories
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts
94751,
92571 and other simular trays.
Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2
$47.58
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73