Broilmaster P3X

B101512 Stainless steel Bowtie burner assembly for P3X Series grills. Includes:

• Stainless steel Bowtie burner
• Stainless steel twin venturi with spider exclusion screens
• Gasket and venturi mounting screws
• Assembly and installation instructions

Genuine Broilmaster factory part. Also known as DPP111.

Part Number: B101512
Weight: 1.0

Stainless steel Bowtie burner assembly for P3X Series grills. Includes:

• Stainless steel Bowtie burner
• Stainless steel twin venturi with spider exclusion screens
• Gasket and venturi mounting screws
• Assembly and installation instructions

NOTE: Same as part# B101512.

Part Number: DPP111
Dimensions: 9 1/2” x 17”
Weight: 3.0

Stainless steel rod cooking grids for size 3 grill head (set of 2).

• Heavy gauge 8mm rod construction
• Restaurant quality stainless steel
• 2 piece set
• Fits: P3, D3, DU3, R3, U3, S3, G3, and R3.

Note: This is the same as part# B101281. Also replaces cast iron grid DPP103, which is no longer available.

Part Number: DPA111
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 25 1/2”
Material: Stainless steel
Weight: 15.8

Briquette Rack. Fits all size 3 grill head models. Manufacturer's Note: Some versions of this rack may include stainless steel extension brackets. See part DPA116 for Ceramic Flare Busters.

Part Number: B101061
Dimensions: 13 13/16” x 23 7/8”
Material: porcelain steel
Weight: 5.4

Flare Buster Flat Ceramic Flavor Enhancer Pad. Sold individually.

Part Number: B101407
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Weight: .35

B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models.

Genuine Broilmaster fatory part. Also known as DPP7SS.

Part Number: B063065
Weight: 1.0

Flare Busters Flat Ceramic Pads. For P3, T3, D3, H3. Package of 12. Each tile measures 7 1/4 ” x 3 1/2”. Used with B101061 rack.

Part Number: DPA116
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Material: ceramic
Weight: 4.5

Electronic ignitor head with two (2) male spade connectors. Fits 3/P4/P5/D3/D4

• Uses 1 AA battery (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072218
Weight: 0.2

Ground Wire, Fits All Electronic Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072684
Weight: 0.1

Ground Lug, Fits All Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069747
Weight: 0.01

Collector Box Spacer, Fits P 3/4 D 3/4/5

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069743
Weight: 0.01

Collector Box (Electronic Ignitor), electrode, & connector wire with female spade end. Fits P3/P4

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B100446
Weight: 0.2

Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.

• Off position D-Value: 3 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: B070084
Weight: 0.04

Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers. Stainless steel case.

Part Number: TG-2B
Weight: 0.2

High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Made in USA

Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65

BBQ'er choice porcelain grill briquets. The finest available.

• Self-Cleaning Porcelain Briquettes.
• Made of fired porcelain for even heat transfer.
• Virtually indestructible.
• About 56 pieces covers approximately 310 square inches.
• Made in USA .

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1