Home > Broil-Mate Grill Models > Broil-Mate 1551-24
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Replacement gas grill parts for Broil-Mate model: 1551-24
1551-24 Burners
Genuine OEM Broil-Mate stainless steel burner and venturi assembly. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.
Part Number: S10017
Dimensions: 8 x 20 1/2
Material: Stainless steel
Weight: 3.5
$76.25
Genuine OEM Broil-Mate Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
1551-24 Cooking Grids
COOKING GRID 390 PORCELAIN, GLOSSY COATED. SOLD INDIVIDUALLY.
- Sold individually
- Number required varies, check your grill
Part Number: 04160152
Dimension Front-to-Back: 15 1/16
Dimension Side-to-Side: 12 3/4
Material: porcleain steel
Weight: 5.8
Image not available
$42.40
1551-24 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave
heat plate. Also replaces porcelain-steel part# 10222-T424, which has been discontinued by the manufacturer.
Part Number: 10222-T425
Dimension Front-to-Back: 11 1/4
Dimension Side-to-Side: 23
Material: Stainless steel
Weight: 3.0
$48.91
1551-24 Igniter Components
Rotary igniter for two outlets uses
round connector wires. INCLUDES KNOB, NOT SHOWN IN PHOTO. Also replaces part# 10342-242, which has been discontinued by the manufacturer.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-249
Weight: 0.2
$17.41
Genuine OEM Broil-Mate collector box and electrode assembly. Includes
- burner mounted collector box (clip on)
- ceramic electrode and 18 wire with round connector and protective sleeve.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: S15500
Weight: 0.1
$5.45
Genuine OEM Broil-Mate 21 wire for side burner or other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T12
Dimensions: 21
Weight: 0.05
$4.21
1551-24 Grease Trays
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA Part Number: S15111
Material: stainless steel
Weight: 0.02
$3.11
1551-24 Knobs and Handles
Genuine OEM Broil-Mate rotary igniter knob for Broil-Mate model 1551-24.
Part Number: 10472-K40
Weight: 0.1
$5.15
1551-24 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
1551-24 Wheels and Castors
Genuine OEM Broil-Mate 7 cart wheel with 3/8 axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for Broil-Mate model 1551-24.
Part Number: 10240-13
Weight: .10
$2.23
1551-24 Miscellaneous Repair Parts
Hinge pin clip for Broil-Mate model 1551-24.
Part Number: S21233
Weight: 0.01
$1.08
Cotter pin for Broil-Mate model 1551-24.
Part Number: Y-11230
Weight: 0.01
$1.08
Washer for Broil-Mate model 1551-24.
Part Number: S21255
Weight: 0.01
$1.08
1551-24 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil-Mate model 1551-24.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
1551-24 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18 x 0 5/8
Material: stainless steel
Weight: 0.4
$6.64
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57