Home > Broil-Mate Grill Models > Broil-Mate 3354-7
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Part diagrams and owners manuals for Broil-Mate model: 3354-7
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
|
Replacement grill parts for Broil-Mate model: 3354-7
3354-7 Burners
Genuine OEM Broil-Mate stainless steel burner and venturi assembly. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.
Part Number: S10077
Material: Stainless steel
Weight: 2.5
Dimensions: 8 x 16
3354-7 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave SS
heat plate for Broil-Mate model 3354-7.
Part Number: 10222-T325
Material: Stainless steel
Weight: 2.4
Dimensions:
- Front-To-Back: 10 3/8″
- Side-To_Side: 18″
3354-7 Igniter Components
Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-21
Weight: 0.05
Genuine OEM Broil-Mate collector box and electrode assembly. Includes
- burner mounted collector box (clip on)
- ceramic electrode and 18 wire with round connector and protective sleeve.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: S15500
Weight: 0.1
3354-7 Grease Trays
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA
Part Number: S15111
Material: stainless steel
Weight: 0.02
3354-7 Knobs and Handles
10472-K431 Control knob large. Black with stainless steel BA strip.
Genuine OEM control knob.
- Off position D-Value: 6 o'clock
- Knob diameter: 2 1/4
- Socket diameter: 5/16
- Knob stem: 1/2
Part Number: 10472-K431
Weight: 0.1
Triangular handle washer. 1/8 in thick. Made of heat resistant compressed material.
Part Number: 10239-7
Weight: 0.05
Dimensions: 1 1/2 x 1 1/4
3354-7 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Weight: 0.80
Five piece 3/8 natural gas quick disconnect set includes:
- Part ASCPL-2 12ft vinyl 3/8 ID Sturgis hose (3/8 inside diameter outside diameter about 1/2) with solid brass fittings
- Part ASCPL-3 Sturgis brand 3/8 quick connect brass coupler
- Hansen & Sturgis dust cover
- plastic dust plug
- Plastic 3/8 MPT Snap Tite
- Suitable up to approximately 60,000 BTU.
Part Number: ASCPL-1
Weight: 3.0
3354-7 Wheels and Castors
Genuine OEM Broil-Mate 7 cart wheel with 3/8 axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
3354-7 Heat indicators and Meat Thermometers
Genuine OEM Broil-Mate Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
3354-7 Miscellaneous Repair Parts
Hinge pin clip for Broil-Mate model 3354-7.
Part Number: S21233
Weight: 0.01
Bolt hex head 1 1/2 length for Broil-Mate model 3354-7.
Part Number: Y-6616
Weight: 0.02
Washer for Broil-Mate model 3354-7.
Part Number: S21255
Weight: 0.01
3354-7 Shelves
SHELF SUPPORT LH BLK for Broil-Mate model 3354-7.
Part Number: 10184-E461
Weight: 1.0
3354-7 Accessories
7 Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.
- Ideal for searving or grilling appetizers
- Wide end for easy handling
Part Number: 11040
Weight: 0.4
Dimensions: 7
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
Dimensions: 16 x 4
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2 x 10 long
Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2 x 10
Stuffed Burger Press
The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.
Part Number: 24795
Weight: .3
|
Broil-Mate 3354-7 - 02-Nov-26
|
We ship Broil-Mate BBQ parts worldwide
Back to Broil-Mate grill parts