Model: 764254

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Broil-Mate Grill Models > Broil-Mate 764254



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.

Replacement grill parts for the Broil-Mate 764254


 

764254 Burners

Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Material: stainless steel
Weight: 0.8
Dimensions: 15 3/4

$20.15








 

764254 Cooking Grids

Cast iron cooking grid. Also known as part # 11243. Replacement for OEM part numbers 11241, 52002-181, 52005-281, 52007-181 cast iron cooking grid per manufacturer. SOLD INDIVIDUALLY.
NOTE: The number of pieces required varies by grill size. Check your grill's cooking grids support area to determine the number of panels needed.

Part Number: 52001-981
Material: cast iron
Weight: 4.0
Dimensions:
  • Front-To-Back: 17 1/2″
  • Side-To_Side: 6 1/8″

$39.64








 

764254 FLAV-R-WAVE

Genuine OEM Broil-Mate stainless steel Flav-R-Wave. The manufacturer has made modifications to this part. See photos.

Part Number: 52209-404
Material: stainless steel
Weight: 1.14
Dimensions:
  • Front-To-Back: 15 7/8″
  • Side-To_Side: 6″

$24.00








 

764254 Igniter Components

Genuine OEM Broil-Mate electronic push-button 2-spade igniter.
  • Uses AAA battery (not included)
  • .Requires 3/4” mounting hole
  • Also replaces part# 10342-242 and 10342-249

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-245
Weight: 0.3

$22.80






Genuine OEM Broil-Mate electrode with 14” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-E13
Weight: 0.05

$2.65








 

764254 Grease Trays

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Material: stainless steel
Weight: .35
Dimensions:
  • Front-To-Back: 6 1/2″
  • Side-To_Side: 6″

$6.43






GREASE TRAY 340-401 BLACK for Broil-Mate model 764254.

Part Number: 57154-901
Material: porcelain treated steel
Weight: .85
Dimensions:
  • Front-To-Back: 6 3/4″
  • Side-To_Side: 18 9/16″
Image not available

$23.35






GREASE PAN - 330/440/550 for Broil-Mate model 764254.

Part Number: 52009-901
Weight: .40
Dimensions:
  • Front-To-Back: 5 1/8″
  • Side-To_Side: 6 1/2″

$13.08








 

764254 Knobs and Handles

10472-K431 Control knob large. Black with stainless steel BA strip.

Genuine OEM control knob.
  • Off position D-Value: 6 o'clock
  • Knob diameter: 2 1/4”
  • Socket diameter: 5/16”
  • Knob stem: 1/2”


Part Number: 10472-K431
Weight: 0.1

$5.94








 

764254 Heat indicators and Meat Thermometers

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

$21.20








 

764254 Miscellaneous Repair Parts

Washer for Broil-Mate model 764254.

Part Number: S21255
Weight: 0.01

$1.08






Hinge pin clip for Broil-Mate model 764254.

Part Number: S21233
Weight: 0.01

$1.08








 

764254 Hardware

LID BUMPER for Broil-Mate model 764254.

Part Number: Y-11231
Weight: 0.01

$1.08








 

764254 Accessories

Cherry wood chips.
  • All natural wood smoke flavor
  • Great for use in BBQ's or smokers.
  • 170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00240
Weight: 1.14

$8.47






Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.



Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4

$16.16






Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.



Part Number: 14913
Material: stailess steel
Weight: 0.5

$14.41






Porcelain Coated Grill Topper.
11” x 16” Single draw construction for improved rigidity. Stainless steel handles and raised contours for improved functionality.

Part Number: 97122
Material: porcelain steel
Weight: 1.10
Dimensions: 16” x 11 1/2”

$29.08






Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most



Part Number: 90963
Weight: 0.2

$19.30







Broil-Mate grill model 764254. Some parts not specific to a grill brand or model like regulators, posts,
and heat indicators, which are listed in our repair parts section. 02-Nov-26



We ship Broil-Mate BBQ parts worldwide

Back to Broil-Mate grill parts


GRILLING  ACCESSORIES

Free USA shipping for orders of gas grill parts of $79 or more for Broil-Mate gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy