Home > Broil-Mate Grill Models > Broil-Mate 764257
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Replacement BBQ grill parts for Broil-Mate model: 764257
764257 Burners
Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
764257 Cooking Grids
Genuine OEM Broil-Mate
cooking grid.
Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)
Part Number: 52007-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 6 5/16”
Material: cast iron
Weight: 3.10
$33.20
764257 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave for Broil-Mate model 764257.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
764257 Igniter Components
COLLECTOR BOX ASSY 330 430SS
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52224-024A
Weight: 0.2
Image not available
$14.06
Genuine OEM Broil-Mate electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
Genuine OEM Broil-Mate electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
764257 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
GREASE PAN - 330/440/550 for Broil-Mate model 764257.
Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40
$15.11
764257 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil-Mate model 764257.
Part Number: 10472-K431
Weight: 0.1
$5.15
764257 Regulators and Hoses
Genuine OEM Broil-Mate NG gas hose for Broil-Mate model 764257.
Part Number: 10111-K45
Weight: 2.1
$88.64
764257 Valves, Orifices, and Manifolds
VALVE ASSEMBLY 3V NG for Broil-Mate model 764257.
Part Number: 59004-017
Weight: 1.0
Image not available
$48.03
764257 Heat indicators and Meat Thermometers
Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
764257 Miscellaneous Repair Parts
Hinge pin clip for Broil-Mate model 764257.
Part Number: S21233
Weight: 0.01
$1.08
764257 Hardware
LID BUMPER for Broil-Mate model 764257.
Part Number: Y-11231
Weight: 0.01
$1.08
764257 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73