Home > Broil-Mate Grill Models > Broil-Mate 764264
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Replacement grill parts to fit Broil-Mate model: 764264
764264 Burners
Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Material: stainless steel
Weight: 0.8
Dimensions: 15 3/4
Genuine OEM Broil-Mate Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
764264 Cooking Grids
Cast iron
cooking grid. Also known as part # 11243. Replacement for OEM part numbers 11241, 52002-181, 52005-281, 52007-181 cast iron
cooking grid per manufacturer. SOLD INDIVIDUALLY.
NOTE: The number of pieces required varies by grill size. Check your grill's
cooking grids support area to determine the number of panels needed.
Part Number: 52001-981
Material: cast iron
Weight: 4.0
Dimensions:
- Front-To-Back: 17 1/2″
- Side-To_Side: 6 1/8″
764264 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave. The manufacturer has made modifications to this part. See photos.
Part Number: 52209-404
Material: stainless steel
Weight: 1.14
Dimensions:
- Front-To-Back: 15 7/8″
- Side-To_Side: 6″
764264 Igniter Components
Genuine OEM Broil-Mate electronic push-button 3-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-246
Weight: 0.6
Genuine OEM Broil-Mate electrode with 14” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
764264 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Material: stainless steel
Weight: .35
Dimensions:
- Front-To-Back: 6 1/2″
- Side-To_Side: 6″
GREASE TRAY 340-401 BLACK for Broil-Mate model 764264.
Part Number: 57154-901
Material: porcelain treated steel
Weight: .85
Dimensions:
- Front-To-Back: 6 3/4″
- Side-To_Side: 18 9/16″
Image not available
GREASE PAN - 330/440/550 for Broil-Mate model 764264.
Part Number: 52009-901
Weight: .40
Dimensions:
- Front-To-Back: 5 1/8″
- Side-To_Side: 6 1/2″
764264 Knobs and Handles
10472-K431 Control knob large. Black with stainless steel BA strip.
Genuine OEM control knob.
- Off position D-Value: 6 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 5/16”
- Knob stem: 1/2”
Part Number: 10472-K431
Weight: 0.1
10472-K231 Control knob small. Black with stainless steel BA strip.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
764264 Valves, Orifices, and Manifolds
VALVE ASSEMBLY 3V+SB LP for Broil-Mate model 764264.
Part Number: 59004-034
Weight: 1.0
Image not available
764264 Heat indicators and Meat Thermometers
Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
764264 Miscellaneous Repair Parts
Washer for Broil-Mate model 764264.
Part Number: S21255
Weight: 0.01
Cotter pin for Broil-Mate model 764264.
Part Number: Y-11230
Weight: 0.01
Hinge pin clip for Broil-Mate model 764264.
Part Number: S21233
Weight: 0.01
764264 Hardware
LID BUMPER for Broil-Mate model 764264.
Part Number: Y-11231
Weight: 0.01
764264 Accessories
Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.
Part Number: 00281
Weight: .45
Dimensions: 11 7/8
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
Dimensions: 16” x 4”
Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.
Part Number: 98130
Material: porcelain steel
Weight: 1.0
Dimensions: 11
Stuffed Burger Press
The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.
Part Number: 24795
Weight: .3
|
Broil-Mate 764264 - 02-Nov-26
|
We ship Broil-Mate BBQ parts worldwide
Back to Broil-Mate grill parts