Home > Broil-Mate Grill Models > Broil-Mate 765344
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Replacement gas grill parts for Broil-Mate model: 765344
765344 Burners
Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Material: stainless steel
Weight: 0.8
Dimensions: 15 3/4
Genuine OEM Broil-Mate Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
765344 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave. The manufacturer has made modifications to this part. See photos.
Part Number: 52209-404
Material: stainless steel
Weight: 1.14
Dimensions:
- Front-To-Back: 15 7/8″
- Side-To_Side: 6″
765344 Igniter Components
Genuine stainless steel one piece collector box. Per manufacturer, replaces part number 52225-014A that was upper and lower pieces. The replacement accomodates four burners, like the orginal.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52015-903
Material: stainless steel
Weight: .5
Dimensions: 19 1/8
Genuine OEM Broil-Mate electronic push-button 4-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
Genuine OEM Broil-Mate electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E12
Weight: 0.05
765344 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Material: stainless steel
Weight: .35
Dimensions:
- Front-To-Back: 6 1/2″
- Side-To_Side: 6″
Grease tray 440; porcelain flatte matte finish for Broil-Mate model 765344.
Part Number: 57055-901
Material: porcelain steel
Weight: 1.25
Dimensions:
- Front-To-Back: 6 3/4″
- Side-To_Side: 25 7/16″
GREASE PAN - 330/440/550 for Broil-Mate model 765344.
Part Number: 52009-901
Weight: .40
Dimensions:
- Front-To-Back: 5 1/8″
- Side-To_Side: 6 1/2″
Genuine OEM Broil-Mate Porcelain Grease Pan for Broil-Mate model 765344.
Part Number: 22009-901
Weight: .45
Dimensions:
- Front-To-Back: 6 1/2″
- Side-To_Side: 5 1/8″
765344 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Weight: .85
Dimensions: 25
10472-K431 Control knob large. Black with stainless steel BA strip.
Genuine OEM control knob.
- Off position D-Value: 6 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 5/16”
- Knob stem: 1/2”
Part Number: 10472-K431
Weight: 0.1
10472-K231 Control knob small. Black with stainless steel BA strip.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
765344 Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Broil-Mate model 765344.
Part Number: 52005-991
Weight: 3.3
Dimensions: 25 5/8
765344 Heat indicators and Meat Thermometers
Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
765344 Miscellaneous Repair Parts
REAR BURNER SPRING for Broil-Mate model 765344.
Part Number: S21362
Weight: 1.0
Washer for Broil-Mate model 765344.
Part Number: S21255
Weight: 0.01
Cotter pin for Broil-Mate model 765344.
Part Number: Y-11230
Weight: 0.01
Hinge pin clip for Broil-Mate model 765344.
Part Number: S21233
Weight: 0.01
765344 Hardware
LID BUMPER for Broil-Mate model 765344.
Part Number: Y-11231
Weight: 0.01
765344 Accessories
Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.
Part Number: 40538
Material: chrome steel
Weight: 1.1
2 in 1 chrome plated turner / tong with PVC coated handle
Part Number: 40730
Material: chrome steel
Weight: 0.6
Dimensions: 14
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Porcelain Coated Square Wok Topper.
12” x 12” x 2” porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.
Part Number: 98121
Material: porcelain steel
Weight: 1.6
Dimensions: 12” x 12”
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
|
Broil-Mate model 765344. If the BBQ grill part you are looking for is not listed above, make a note of the dimensions of your original part and try searching by part category. 02-Nov-26
|
We ship Broil-Mate BBQ parts worldwide
Back to Broil-Mate grill parts