Model: 765347

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Broil-Mate Grill Models > Broil-Mate 765347



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.

Replacement grill parts for the Broil-Mate 765347


 

765347 Burners

Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Material: stainless steel
Weight: 0.8
Dimensions: 15 3/4

$20.15






Genuine OEM Broil-Mate Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

$11.19








 

765347 FLAV-R-WAVE

Genuine OEM Broil-Mate stainless steel Flav-R-Wave. The manufacturer has made modifications to this part. See photos.

Part Number: 52209-404
Material: stainless steel
Weight: 1.14
Dimensions:
  • Front-To-Back: 15 7/8″
  • Side-To_Side: 6″

$24.00








 

765347 Igniter Components

Genuine stainless steel one piece collector box. Per manufacturer, replaces part number 52225-014A that was upper and lower pieces. The replacement accomodates four burners, like the orginal.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 52015-903
Material: stainless steel
Weight: .5
Dimensions: 19 1/8

$17.45






Genuine OEM Broil-Mate electronic push-button 4-spade igniter.
  • Uses AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-247
Weight: 0.5

$16.16






Genuine OEM Broil-Mate electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-E12
Weight: 0.05

$2.58








 

765347 Grease Trays

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Material: stainless steel
Weight: .35
Dimensions:
  • Front-To-Back: 6 1/2″
  • Side-To_Side: 6″

$6.43






Grease tray 440; porcelain flatte matte finish for Broil-Mate model 765347.

Part Number: 57055-901
Material: porcelain steel
Weight: 1.25
Dimensions:
  • Front-To-Back: 6 3/4″
  • Side-To_Side: 25 7/16″

$27.24






GREASE PAN - 330/440/550 for Broil-Mate model 765347.

Part Number: 52009-901
Weight: .40
Dimensions:
  • Front-To-Back: 5 1/8″
  • Side-To_Side: 6 1/2″

$13.08






Genuine OEM Broil-Mate Porcelain Grease Pan for Broil-Mate model 765347.

Part Number: 22009-901
Weight: .45
Dimensions:
  • Front-To-Back: 6 1/2″
  • Side-To_Side: 5 1/8″

$13.08








 

765347 Knobs and Handles

LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.

Part Number: 24005-12A
Weight: .85
Dimensions: 25

$25.86






10472-K431 Control knob large. Black with stainless steel BA strip.

Genuine OEM control knob.
  • Off position D-Value: 6 o'clock
  • Knob diameter: 2 1/4”
  • Socket diameter: 5/16”
  • Knob stem: 1/2”


Part Number: 10472-K431
Weight: 0.1

$5.94






10472-K231 Control knob small. Black with stainless steel BA strip.

  • Off position D-Value: 6 o'clock
  • Knob diameter: 1 7/8”
  • Socket diameter: 5/16”
  • Knob shaft: 1/2”


Part Number: 10472-K231
Weight: 0.1

$5.15








 

765347 Regulators and Hoses

Five piece 3/8” natural gas quick disconnect set includes:
  • Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
  • Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
  • Hansen & Sturgis dust cover
  • plastic dust plug
  • Plastic 3/8 MPT Snap Tite
  • Suitable up to approximately 60,000 BTU.


Part Number: ASCPL-1
Weight: 3.0

$79.46








 

765347 Warming Racks

WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Broil-Mate model 765347.

Part Number: 52005-991
Weight: 3.3
Dimensions: 25 5/8

$35.16








 

765347 Valves, Orifices, and Manifolds

VALVE ASSY 440 S/B R/B NG for Broil-Mate model 765347.

Part Number: 59005-077
Weight: 1.0
Image not available

$98.25








 

765347 Heat indicators and Meat Thermometers

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

$21.20








 

765347 Miscellaneous Repair Parts

REAR BURNER SPRING for Broil-Mate model 765347.

Part Number: S21362
Weight: 1.0

$1.08






Cotter pin for Broil-Mate model 765347.

Part Number: Y-11230
Weight: 0.01

$1.08






Hinge pin clip for Broil-Mate model 765347.

Part Number: S21233
Weight: 0.01

$1.08








 

765347 Hardware

LID BUMPER for Broil-Mate model 765347.

Part Number: Y-11231
Weight: 0.01

$1.08








 

765347 Accessories

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60






Polished stainless steel turner with an ergonomic soft grip grey handle and red accents. Great for flipping burgers or turning delicate fish fillets.



Part Number: 43108
Material: stainless steel
Weight: 0.10
Dimensions: 16

$9.48






Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.



Part Number: 42055
Weight: 0.2
Dimensions: 13

$8.76






Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Material: porcelain steel
Weight: 1.0
Dimensions: 11

$19.15






Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most



Part Number: 90963
Weight: 0.2

$19.30







Broil-Mate grill model 765347. Some parts not specific to a grill brand or model like regulators, posts,
and heat indicators, which are listed in our repair parts section. 02-Nov-26



We ship Broil-Mate BBQ parts worldwide

Back to Broil-Mate grill parts


GRILLING  ACCESSORIES

Free USA shipping for orders of gas grill parts of $79 or more for Broil-Mate gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy