Home > Broil-Mate Grill Models > Broil-Mate 765354
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Replacement BBQ grill parts for Broil-Mate model: 765354
765354 Burners
Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Material: stainless steel
Weight: 0.8
Dimensions: 15 3/4
765354 Cooking Grids
Cast iron
cooking grid. Also known as part # 11243. Replacement for OEM part numbers 11241, 52002-181, 52005-281, 52007-181 cast iron
cooking grid per manufacturer. SOLD INDIVIDUALLY.
NOTE: The number of pieces required varies by grill size. Check your grill's
cooking grids support area to determine the number of panels needed.
Part Number: 52001-981
Material: cast iron
Weight: 4.0
Dimensions:
- Front-To-Back: 17 1/2″
- Side-To_Side: 6 1/8″
765354 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave. The manufacturer has made modifications to this part. See photos.
Part Number: 52209-404
Material: stainless steel
Weight: 1.14
Dimensions:
- Front-To-Back: 15 7/8″
- Side-To_Side: 6″
765354 Igniter Components
Genuine stainless steel one piece collector box. Per manufacturer, replaces part number 52225-014A that was upper and lower pieces. The replacement accomodates four burners, like the orginal.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52015-903
Material: stainless steel
Weight: .5
Dimensions: 19 1/8
Genuine OEM Broil-Mate electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4 mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
Genuine OEM Broil-Mate electrode with 11 connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E12
Weight: 0.05
765354 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Material: stainless steel
Weight: .35
Dimensions:
- Front-To-Back: 6 1/2″
- Side-To_Side: 6″
Grease tray 440; porcelain flatte matte finish for Broil-Mate model 765354.
Part Number: 57055-901
Material: porcelain steel
Weight: 1.25
Dimensions:
- Front-To-Back: 6 3/4″
- Side-To_Side: 25 7/16″
GREASE PAN - 330/440/550 for Broil-Mate model 765354.
Part Number: 52009-901
Weight: .40
Dimensions:
- Front-To-Back: 5 1/8″
- Side-To_Side: 6 1/2″
Genuine OEM Broil-Mate Porcelain Grease Pan for Broil-Mate model 765354.
Part Number: 22009-901
Weight: .45
Dimensions:
- Front-To-Back: 6 1/2″
- Side-To_Side: 5 1/8″
765354 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2 apart.
Part Number: 24005-12A
Weight: .85
Dimensions: 25
10472-K431 Control knob large. Black with stainless steel BA strip.
Genuine OEM control knob.
- Off position D-Value: 6 o'clock
- Knob diameter: 2 1/4
- Socket diameter: 5/16
- Knob stem: 1/2
Part Number: 10472-K431
Weight: 0.1
765354 Heat indicators and Meat Thermometers
Genuine OEM Broil-Mate Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
765354 Miscellaneous Repair Parts
Washer for Broil-Mate model 765354.
Part Number: S21255
Weight: 0.01
Hinge pin clip for Broil-Mate model 765354.
Part Number: S21233
Weight: 0.01
765354 Hardware
LID BUMPER for Broil-Mate model 765354.
Part Number: Y-11231
Weight: 0.01
765354 Accessories
Set of four 15 skewers. All stainless steel construction.
Unique v-shaped skewers keep food from spinning on shaft.
Part Number: 46074
Material: stainless steel
Weight: 0.4
Dimensions: 18 x 0 5/8
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2 x 10 long
Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2 x 10
GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.
The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanksperfect for grilling, camping, patio heaters, and more
Made in USA
Part Number: 00030
Weight: 0.1
|
Broil-Mate 765354. We have a large inventory of BBQ accessories such as BBQ tools, baskets, grill covers in our accessories section. 02-Nov-26
|
We ship Broil-Mate BBQ parts worldwide
Back to Broil-Mate grill parts