Home > Charbroil Grill Models > Charbroil 461461108
Thermos 4-Burner LP gas outdoor BBQ grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 461461108
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
|
Replacement BBQ grill parts for Charbroil model: 461461108
461461108 Burners
Stainless steel burner for Charbroil model 461461108.
Replaces Charbroil factory part# 80009947
Part Number: 15491
Material: stainless steel
Weight: 0.9
Dimensions: 14 3/8” x 1”
461461108 Burner Brackets and Carryovers
stainless steel cross-over burner for Charbroil model 461461108.
Replaces Charbroil factory part# 80009949
Part Number: 05595
Material: stainless steel
Weight: 0.1
Dimensions: 7 7/16” x 0 3/4”
461461108 Cooking Grids
Cast Iron
Cooking Grid.
Porcelain treated, matte finish. SOLD INDIVIDUALLY.
Part Number: CG-97P-CI
Material: cast iron
Weight: 4.65
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 9 5/16″
Cast Iron
Cooking Grids.
Porcelain treated, matte finish. SET OF THREE (3).
Replaces Charbroil factory part# 80008076
Part Number: CG-97P-CI-X3
Material: cast iron
Weight: 14.0
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 9 5/16″
461461108 Flame Tamers
Stainless steel aftermarket Flame Tamer
heat plate.
- Stainless equivalent of part 98741
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA

Part Number: 98741-SS
Material: stainless steel
Weight: 0.8
Dimensions:
- Front-To-Back: 14 11/16″
- Side-To_Side: 4 5/16″
Porcelain steel Flame Tamer. Sold individually.
Replaces Charbroil factory part# 80008074
Part Number: 98741
Material: porcelain steel
Weight: 0.9
Dimensions:
- Front-To-Back: 14 5/8″
- Side-To_Side: 4 5/16″
$34.85
$23.99
461461108 Igniter Components
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Weight: 0.1
Dimensions: 46
Burner mounted electrode for use with 15591 and 15491 burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 80009948
Part Number: 04430
Material: ceramic
Weight: 0.1
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 80009955
Part Number: IGEIB4-B
Weight: 0.3
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 80009955
Part Number: 03340
Weight: 0.5
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
461461108 Knobs and Handles
Universal black control knob. Counter-clockwise bezel.
- Off position D-Value: Selectable
- Knob diameter: 2 1/16”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01800
Material: plastic
Weight: 0.05
Dimensions: 2 1/16” x 2 1/16”
Black control knob for Fire Magic Custom, Regal, and Gourmet grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 2”
- Socket diameter: 8mm
- Knob shaft: None
Replaces Charbroil factory part# 80008675
Part Number: 01700
Material: plastic
Weight: 0.1
Dimensions: 2” x 2”
461461108 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Replaces Charbroil factory part# G431-0020-W2
Part Number: 00018
Weight: 0.1
Dimensions: 1 13/16” x 1 13/16”
461461108 Accessories
Set of four 15” skewers. All stainless steel construction.
Unique v-shaped skewers keep food from spinning on shaft.
Part Number: 46074
Material: stainless steel
Weight: 0.4
Dimensions: 18” x 0 5/8”
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
Dimensions: 16” x 4”
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Porcelain Coated Grill Topper.
11” x 16” Single draw construction for improved rigidity. Stainless steel handles and raised contours for improved functionality.
Part Number: 97122
Material: porcelain steel
Weight: 1.10
Dimensions: 16” x 11 1/2”
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Charbroil 461461108. We have a large inventory of BBQ accessories such as BBQ tools, baskets, grill covers in our accessories section. 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts