Home > Charbroil Grill Models > Charbroil 463268606
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement gas grill parts for Charbroil model: 463268606
463268606 Burners
Stainless steel burner. Includes screw in venturi for adjusting air flow.
Replaces Charbroil factory part# 80005591
Part Number: 15591
Dimensions: 15 7/8” x 1”
Material: stainless steel
Weight: 0.8
$34.77
463268606 Burner Brackets and Carryovers
stainless steel cross-over burner for Charbroil model 463268606.
Replaces Charbroil factory part# 80005592
Part Number: 05592
Dimensions: 6 3/8” x 0 13/16”
Material: stainless steel
Weight: 0.1
$14.85
463268606 Cooking Grids
Stainless Steel
cooking grids. SET OF TWO (2) panels.
- Made in USA
- Solid 5/16” 304 stainless rods
- Each panel measures 18 1/2” x 12 3/4”
- Overall dimensions: 18 1/2” x 25 1/2”
Part Number: CG-109SS-X2
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 25 1/2”
Weight: 15.0
$204.95
Reversible, heavy cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Replaces Charbroil factory part# 80005665
Part Number: 66652
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 26 1/4”
Material: matte cast iron
Weight: 19.35
$168.70 $119.99
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA
- Commercial grade 304 stainless steel
- 5/16” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 18 1/2”
- Side-to-Side: 12 3/4”
Total Side-to-Side: 25 1/2”Part Number: 54712-SS-X2
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 25 1/2”
Weight: 5.0
$204.95
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- Solid 5/16” diameter solid stainless rods
- Sold individually
Fits grills made by Charbroil, Kenmore, Master Chef and others.
Part Number: 54712-SS
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 12 3/4”
Weight: 2.5
$104.85
Reversible, heavy cast iron
cooking grids.
Porcelain treated, flat matte finish. SOLD INDIVIDUALLY
Part Number: 66652-1PC
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 13 1/8”
Material: matte cast iron
Weight: 10.0
$119.95 $63.28
Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 18 1/4”
- Side-to-Side: 13 1/8”
Total Side-to-Side: 26 1/4”Part Number: 66652-UNI-X2
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 26 1/4”
Material: cast iron
Weight: 18.8
$111.52
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 66652-UNI-X2 for a set of two (2) grids.
Part Number: 66652-UNI
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 13 1/8”
Material: cast iron
Weight: 9.4
$61.91
463268606 Heat Plates
SET OF FOUR/4 PACK Flame Tamer, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0141-X4
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 3.92
$56.88
Flame Tamer, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0141
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.98
$21.87
463268606 Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Replaces Charbroil factory part# 80003332
Part Number: 93321
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 1.0
$25.40 $20.90
Stainless steel aftermarket Flame Tamer
heat plate.
- Stainless equivalent of part 93321
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 93321-SS
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.7
$21.87
463268606 Igniter Components
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03342
Weight: 0.3
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
Burner mounted electrode for use with 15591 and 15491 burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04430
Material: ceramic
Weight: 0.1
$12.47
463268606 Knobs and Handles
Universal 2 5/16” knob.
- Selectable D-Value
- Selectable socket diameter - 6mm or 8mm.
- Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
- Includes 6 shaft inserts and set screw.
- Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).
Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20
$16.93
463268606 Heat indicators and Meat Thermometers
Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.
- Requires minimum 3/8” mounting hole
- Single 1 3/8” probe
- Threaded portion of probe stops at 1/2” from base
- See photo for details
Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1
$15.16
Semi-circular, snap in heat indicator with 2 3/4” heat prob for Charbroil model 463268606.
Replaces Charbroil factory part# 80004030
Part Number: 00473
Dimensions: 1 3/4” x 1 3/16”
Material: stainless steel
Weight: 0.1
$14.09
463268606 Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31